A.saltwater side of the condenser
B.refrigerant side of the condenser
C.in the evaporator coils
D.in the suction strainer
您可能感興趣的試卷
你可能感興趣的試題
A.cutout
B.pressure controller
C.controller switch
D.cutout switch
A.remove any air that may accumulate in the system
B.take out unpleasant fumes from the refrigerant
C.vent off excess refrigerant in an emergency
D.permit opening the refrigerating system for cleaning and inspecting
A.to increase the system efficiency by sensible heat transfer
B.to stop the liquid from flashing
C.to reduce the load on the compressor
D.to remove latent heat of vaporization and the suction piping transfer
A.its pressure and temperature are both lowered
B.its pressure and temperature are both raised
C.its pressure is lowered and its temperature is raised
D.its pressure is raised and its temperature is lowered
A.thermal valve
B.magnetic stop valve
C.bellows valve
D.bimetallic valve
最新試題
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?（）
Using a file without a handle may result in （）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The condensers located in various stages of a flash evaporator are cooled by（）
The treatment of the fuel oils involves storage, heating, filtering and（）
If separating effect is not good, which measure should be taken （）
The main purpose of port State control is not to（）
Which of the following items don’t belong to dock repair works?（）
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?（）