A.varying the DC exciter voltage
B.varying the reluctance of the air gap
C.regulating the speed of the prime mover
D.shorting out part of the armature windings
您可能感興趣的試卷
你可能感興趣的試題
A.a rheostat
B.a balancing coil
C.changing field excitation
D.adjusting the governor settings
A.32~5 amps
B.25 amps
C.1~5 amps
D.30 amps
A.the rudder angle indicator reading
B.the desired rudder angle reading
C.the measured rudder angle reading
D.the intended rudder angle reading
A.the rudder should be moved through its full extent
B.the rudder should be moved in starboard direction
C.the rudder should be moved with the ship at maximum speed
D.the rudder should be moved with the ship at minimu
A.Both the main steering gear and the auxiliary steering gear should be operated
B.The alarms fitted to the remote control system should be operated
C.The emergency generator compartment should be checked
D.The communication system between the bridge and the steering gear compartment should be operated
最新試題
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
（） is not installed on the main switchboar.
The condensers located in various stages of a flash evaporator are cooled by（）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
Using a file without a handle may result in （）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
The ISPS Code consists of a mandatory section-Part A, which shows（）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.