A.Set and drift of the current
B.Relative track information
C.Predicted time of CPA
D.Initial range of acquisition
您可能感興趣的試卷
你可能感興趣的試題
A.enhance weak target echoes and brighten them on the PPI
B.reduce clutter over the entire PPI by shortening the echoes
C.only suppress weak targets to a limited distance from the ship (sea clutter)
D.reduce the beam width to provide a map-like presentation for navigation
A.Immediately after floating free
B.After about one hour when the salt water activates the battery
C.Only when keyed by the radar of another vessel
D.Only when daylight activates the photovoltaic cell
A.the best fix is obtained by using a tangent bearing and a range
B.and using two radar ranges for a fix，the objects of the ranges should be close to reciprocal bearings
C.and using ranges，the most rapidly changing range should be measured last
D.and crossing a radar range of one object with the visual bearing of a second object，the two objects should be 80°to 110°apart
A.Increase the radar gain to pick up weak echoes through the rain
B.Increase the STC setting to reduce close-in spurious signals
C.Navigate as though the effective range of the radar has been reduced
D.Increase the range of the inner and outer guard rings
A.The target vessel's generated course and speed are based solely on radar inputs
B.Navigational constraints may require a target vessel to change course
C.The trial maneuver feature will automatically determine a course that will clear all targets
D.You cannot determine if a small target has been lost due to sea return
最新試題
You are underway at 5 knots and see on your radar a contact 10 miles directly astern of you. 12 minutes later，the contact is 8 miles directly astern of you. What is the estimated speed of the contact? （）
Which procedure(s) shall be used to determine risk of collision? （）
Although manual plotting for CPA works well，the workload can become overwhelming when confronted with（）.
You are scanning the radar screen for a buoy fitted with racon. How should this signal appear on the PPI display?（）
What will cause the ARPA to emit a visual alarm，audible alarm，or both?（）
（）is not used in modern radar.
The development of（）led to the fully automatic ARPA systems installed on commercial ships.
Your ARPA has been tracking a target and has generated the targets course and speed.The radar did not receive a target echo on its last two scans due to the weather.What should you expect under these circumstances（）.
Which condition indicates that your radar needs maintenance?（）
When using an ARPA，what should you consider in order to evaluate the information displayed?（）