Refer to the exhibit. What command sequence will enable PAT from the inside to outside network?()
A.(config) ip nat pool isp-net 1.2.4.2 netmask 255.255.255.0 overload
B.(config-if) ip nat outside overload
C.(config) ip nat inside source list 1 interface ethernet1 overload
D.(config-if) ip nat inside overload
您可能感興趣的試卷
你可能感興趣的試題
A.arpa
B.ansi
C.ietf
D.nonstandard
E.Q.933a
F.Cisco
A.display fr map-info(顯示映射表)
B.display fr pvc-info(PVC統計信息)
C.display fr lmi-info
D.display interface
Refer to the exhibit. What does the (*) represent in the output?()
A.Packet is destined for a local interface to the router.
B.Packet was translated, but no response was received from the distant device.
C.Packet was not translated, because no additional ports are available.
D.Packet was translated and fast switched to the destination.
A.This is a 10 Mb/s switch port
B.This is a 100 Mb/s switch port
C.This is an Ethernet port operating at half duplex
D.This is an Ethernet port operating at full duplex
E. This is a port on a network interface card in a PC
Refer to the exhibit. The user at Workstation B reports that Server A cannot be reacheD.What ispreventing Workstation B from reaching Server A?()
A.The IP address for Server A is a broadcast address.
B.The IP address for Workstation B is a subnet address.
C.The gateway for Workstation B is not on the same subnet.
D.The gateway for Server A is not on the same subnet.
最新試題
請參見圖示。一臺主機正使用NAT 連接到Internet。下列哪三項IP 地址可實現此連接?()
請參見圖示。主機B 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,San Francisco 器由器的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為10.10.1.2而目的IP 地址為10.31.1.20的數據包。捕獲該幀時,它的目的MAC 地址是什么?()
請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet??梢詾槁酚善鹘涌赟0/0/0分配下列哪一個IP 地址?()
請參見圖示。公司路由器由于故障被更換。更換路由器之后,Education 辦公室內的主機C 和D 能夠相互ping 通,但是無法訪問Accounts 辦公室內的主機。此問題的原因可能是什么?()
請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()
以下哪兩種介質可提供高達1Gb/s 的帶寬?()
何時必須使用clock rate 命令配置路由器串行接口?()
傳輸層如何讓主機能同時針對不同應用程序維護多個通信流?()
請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()
在Cisco IOS 設備中,啟動配置文件存儲于何處?()