單項選擇題What is the most likely reason for the dispartly between the actual network numbers at the branches and the routes in the routing table on Gateway-Router?()

A.Branch-Router2 is configured to send both RIPv1 and RIPv2 updates.
B.Gateway-Router is configured to only receive RIPv2 updates.
C.Gateway-router is configured to receive only RIPv1 updates.
D.Branch-Router1 is configured to only send RIPv1 updates


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題Select the action that results from executing these commands. Switch(config-if)# switchport port-security. Switch(config-if)# switchport port-security mac-address sticky()

A.A dynamically learned MAC address is saved in the startup-configuration file.
B.A dynamically learned MAC address is saved in the running-configuration file.
C.A dynamically learned MAC address is saved in the VLAN database.
D.Statically configured MAC addresses are saved in the startup-configuration file if frames from that address are received.
E.Statically configured MAC addresses are saved in the running-configuration file if frames from that address are received.

2.單項選擇題which address range efficiently summarizes the routing table of the addresses for router main?()

A.172.16.0.0/18
B.172.16.0.0/16
C.172.16.0.0/20
D.172.16.0.0/21

3.多項選擇題Which two benefits are provided by creating VLANs? ()

A.added security
B.dedicated bandwidth
C.provides segmentation
D.allows switches to route traffic between subinterfaces
E.contains collisions

4.多項選擇題

Refer to the exhibit.Assume that the routing protocol referenced in each choice below is configured with its default settings and the given routing protocol is running on all the routers. Which two conditional statements accurately state the path that will be chosen between networks 10.1.0.0 and 10.3.2.0 for the routing protocol mentioned? ()

A.If OSPF is the routing protocol, the path will be from R1 to R3 to R4 to R5.
B.If OSPF is the routing protocol, the path will be from R1 to R2 to R5.
C.If OSPF is the routing protocol, the path will be from R1 to R5.
D.If RIPv2 is the routing protocol, the path will be from R1 to R3 to R4 to R5.
E.If RIPv2 is the routing protocol, the path will be from R1 to R5.

5.單項選擇題assuming the default switch configuration which vlan range can be added modified and removed on a cisco switch?()

A.2 through 1001
B.1 through 1001
C.1 through 1002
D.2 through 1005

最新試題

請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()

題型:單項選擇題

請參見圖示。哪種邏輯拓撲是對圖示網絡的準確描述?()

題型:單項選擇題

請參見圖示。主機A 和B 無法互相通信。此問題的原因是什么?()

題型:單項選擇題

請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口?()

題型:單項選擇題

請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()

題型:單項選擇題

請參見圖示。一臺主機正使用NAT 連接到Internet。下列哪三項IP 地址可實現此連接?()

題型:多項選擇題

請參見圖示。公司路由器由于故障被更換。更換路由器之后,Education 辦公室內的主機C 和D 能夠相互ping 通,但是無法訪問Accounts 辦公室內的主機。此問題的原因可能是什么?()

題型:單項選擇題

要將數據包發送到遠程網絡,應使用哪種設備?()

題型:單項選擇題

請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()

題型:單項選擇題

請參見圖示。主機X 和主機Y 與本地網絡的通信受到限制。此問題的原因是什么?()

題型:單項選擇題