A. SW1#show swithport port-security interface FastEthernet 0/12
B. SW1# show swithport port-secure interface FastEthernet 0/12
C. SW1# show port-secure interface FastEthernet 0/12
D. SW1#show running-config
E. SW1#show port-security interface FastEthernet 0/12
您可能感興趣的試卷
你可能感興趣的試題
A.手動關閉的接口。
B.物理安全的接口。
C.配置虛擬終端的密碼和登錄過程。
D.輸入一個訪問列表,并將其應用到使用access-class命令終端接口。
E.創建一個訪問列表,并將其應用到使用access-group命令終端接口。
Refer to the exhibit.The network shown in the exhibit is running the RIPv2 routing protocol.The network has converged,and the routers in this network are functioning properly .The FastEthernet0/0 interface on R1 goes down.In which two ways will the routers in this network respond to this change?()
A.R1 will send LSAs to R2 and R3 informing them of this change, and then all routers will send periodic updates at an increased rate until the network again converges.
B.Because of the split-horizon rule, router R2 will be prevented from sending erroneous information to R1 about connectivity to the 192.168.1.0 network.
C.When router R2 learns from R1 that the link to the 192.168.1.0 network has been lost, R2 will respond by sending a route back to R1 with an infinite metric to the network.
D.Routers R2 and R3 mark the route as inaccessible and will not accept any further routing updates from R1 until their hold-down timers expire.
E.All routers will reference their topology database to determine if any backup routes to the 192.168.1.0 network are known.
A. access-list 10 permit ip 192.168.147.0 0.0.0.255.255
B. access-list 10 permit ip 192.168.149.0 0.0.0.255.255
C. access-list 10 permit ip 192.168.146.0 0.0.0.0.255
D. access-list 10 permit ip 192.168.146.0 0.0.0.1.255
E. access-list 10 permit ip 192.168.148.0 0.0.0.1.255
F. access-list 10 permit ip 192.168.146.0 255.255.255.0
A. access-list 50 deny 192.168.1.1 0.0.0.255
B. access-list 110 permit ip any any
C. access-list 2500 deny tcp any host 192.168.1.1 eq 22
D. access-list 101 deny tcp any host 192.168.1.1
A.802.1Q本地VLAN幀未標記的默認
B.802.1Q中繼端口,也可以是安全的端口
C.802.1Q中繼可以使用10Mb/s以太網接口
D.802.1Q中繼需要全雙工,點對點連接
E.802.1Q中繼應該兩頭的本地VLAN是相同的
最新試題
請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置?()
請參見圖示。主機A 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,路由器Y 的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為172.16.1.5而目的IP 地址為172.16.7.24的數據包。捕獲該幀時,它的源MAC 地址是什么?()
請參見圖示。主機X 和主機Y 與本地網絡的通信受到限制。此問題的原因是什么?()
請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()
下列哪些是私有IP 地址的地址范圍?()
請參見圖示。公司路由器由于故障被更換。更換路由器之后,Education 辦公室內的主機C 和D 能夠相互ping 通,但是無法訪問Accounts 辦公室內的主機。此問題的原因可能是什么?()
OSI 哪一層可提供有序的數據重構服務?()
路由器使用哪一項信息來確定源主機和目的主機之間的路徑?()
請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()
以下哪兩種介質可提供高達1Gb/s 的帶寬?()