A.Guaranteed PHB
B.Class-Selector PHB
C.Reserved Forwarding PHB
D.Discard Eligible PHB
E.Priority PHB
您可能感興趣的試卷
你可能感興趣的試題
A.with traffic shaping,a router stores excess traffic in packet buffers until bandwidth is available again
B.with policing you can tune the buffer usage for traffic exceeding the specified CIR
C.with shaping you can tune the buffer usage for traffic exceeding the specified CIR
D.shaping should only be applied for ingress traffic,policing only for egress
E.policing uses a token bucket algorithm,shaping uses an SPD algorithm
A.Both support normal and extended VLAN ranges.
B.ISL is a Cisco proprietary encapsulation method and 802.1Q is an IEEE standard.
C.ISL encapsulates the original frame.
D.Both support native VLANs.
E.802.1Q does not encapsulate the original frame.
Refer to the exhibit. What is the overall type of queuing being used on the outgoing data for interface Ethernet0/1? ()
A.LLQ
B.FIFO
C.CBWFQ
D.priority queuing
E.weighted fair queuing
F.IP RTP priority queuing
A.It supports autonegotiation for both ISL and IEEE 802.1Q trunks.
B.It must be disabled on an interface if you do not want the interface to work as a trunk or start negotiation to become a trunk.
C.It is a point-to-multipoint protocol.
D.It is a point-to-point protocol.
E.It is not supported on private VLAN ports or tunneling ports.
A.802.1D bridges do not relay BPDUs.
B.802.1w bridges do not relay BPDUs.
C.802.1D bridges only relay BPDUs received from the root.
D.802.1w bridges only relay BPDUs received from the root.
最新試題
hsrp speak狀態(tài)是什么意思?
DHCP SERVER在給一個網段設置POOL時,該網段路由器接口地址能不能放入POOL,能why,不能why。
What is method list for configure aaa?
Which of the following are key characteristics of PPP?()
what is four ospf area type?
QoS機制中的分類,采用ip數(shù)據(jù)包中的哪個字段?
Refer to the exhibit.The network administrator is in acampus building distant from Building B.WANRouter is hosting a newly installed WAN link on interface S0/0.The new link is not functioning and the administrator needs to determine if the correct cable has been attached to the S0/0 interface.How can the administrator accurately verify the correct cable type on S0/0 in the most efficient manner?()
What is the three main step of using the QoS feature with MQC command line interface?
When upgrading the IOS image,the network administrator receives the exhibited error message.What could be the cause of this error?()
QoS Mechanisms:問在部署QoS中要用的3個mechanisms是什么?