多項選擇題FabricPath brings the benefits of routing protocols to layer 2 network Ethernet environments. What are the advantages of using FabricPath technology? ()   

A. FabricPath provides MAC address scalability with conversational learning
B. Loop mitigation with TTL in the frame field
C. STPl independence
D. 10 Gbps bandwidth
E. Layer 2 extensions between data centers


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題

Refer to the exhibit.

The Cisco UCS domain is operating in switching mode. A network administrator notices that no traffic is traversing the uplinks on Fabric Interconnect B (Path C). 

Which actions might be used to change this behavior?()

A. Fix the port channel configuration between Fabric Interconnect B and Nexus 5548 B as the port channel IDs do not match.
B. Modify the bridge priority on the fabric interconnects so that one of the Nexus 5548s will always be the root bridge.
C. Modify the bridge priority on the Nexus 5548s so that one of them will always be the root bridge.
D. Modify the port priorities on the fabric interconnect uplinks (Paths B and C) so that they are a higher priority than ports Eth1/4 and Eth1/9 (Path D).
E. This is an invalid configuration as Cisco UCS fabric interconnects cannot be directly connected.

2.單項選擇題A Cisco Application Control Engine Appliance (ACE) non-admin context does not support "sticky" configuration. What is the reason for this issue?()

A. ACE sticky license is not installed
B. ACE stickiness is not supported in a non-admin context
C. ACE stickiness resources are not defined in an admin context
D. Stickiness is configured properly in the CCIE virtual context

3.單項選擇題KAL-AP on the Cisco ACE allows communication with Cisco ACE Global Site Selector, to report virtual IP and real server availability. Which statement is true about KAL-AP?()

A. It is a Cisco propriety keepalive.
B. It supports a maximum of 256 KAL-AP entries.
C. It supports a maximum of 256 KAL-AP keepalives.
D. It is used for both Cisco and non-cisco load balancers.

4.單項選擇題Which statement is true about "full state backup" in a Cisco Unified Computing System?()

A. An XML file containing all details of the system, including IP address and cluster details 
B. A binary file containing only service profiles, pools, and other items configured after initial configuration
C. A binary file containing all details of the system, including IP address and cluster details
D. An XML file containing only service profiles, pools, and other items configured after initial configuration
E. A text file with the NX-OS running configuration

5.單項選擇題An administrator creates a vNIC and assigns it to Fabric A with the fabric failover feature enabled. Which statement is true?()

A. A· unique vEthernet interface will be created on Fabric A· and Fabric B·
B. A·  vEthernet interface will be created only on Fabric A·
C. A· vEthernet interface will be created on Fabric A·, and move across to Fabric B· in the event of failure
D. Fabric B· will learn the vEthernet interface from Fabric A· through a GARP E· The same vEthernet interface will be created on Fabric A· and Fabric B·

6.單項選擇題Which GSS "source access list" is used to allow access to GSS by clients when GSS is being used as the DNS?()

A. Client IP
B. Proxy IP
C. Client and proxy IP
D. Neither client nor proxy IP

7.單項選擇題What interface is created when an FC Port Channel is created on a Cisco Unified Computing System?()

A. An interface ’san-port-channel’ in NXOS
B. An interface ’port-channel’ in NXOS
C. An interface ’port-channel’ with ’mode fc’ configured
D. An interface ’fc-port-channel’ in NXOS

8.單項選擇題In the event of a GSS failure in a GSS cluster, which is true?()

A. The current connections are rerouted via the backup GSS
B. Secondary GSS cannot be used to configure the GSS cluster
C. All remaining GSSs in the cluster continue responding to any new queries
D. All records in the GSS database are flushed and reconstructed again using a new master GSS

9.單項選擇題Given a Cisco Unified Computing System, which is a valid port type in end-host mode?()

A. Server
B. End device
C. Node
D. Host
E. Virtual

10.單項選擇題Where are SAN Port Channel is created in UCS Manager?()

A. Under the Admin tab on the FI
B. Under the Server tab in the service profile
C. Under the SAN tab on each VSAN
D. Under the Admin tab on the chassis
E. Under the SAN tab on the Fabric Interconnect

最新試題

Refer to the exhibit.The Cisco UCS domain is operating in switching mode. A network administrator notices that no traffic is traversing the uplinks on Fabric Interconnect B (Path C).  Which actions might be used to change this behavior?()

題型:單項選擇題

Refer to the exhibit.Your company requires a Cisco UCS configuration that will, at a minimum, allow the configuration in the provided exhibit.  Which Cisco UCS components will meet the requirement?()

題型:多項選擇題

An administrator creates a vNIC and assigns it to Fabric A with the fabric failover feature enabled. Which statement is true?()

題型:單項選擇題

What is the use of an "all configuration" backup in Cisco UCS?()

題型:單項選擇題

Which statement is true regarding Backup tasks in Cisco UCS?()

題型:單項選擇題

What is required for Cisco UCS C-Series rack server integration with Cisco UCS Manager?()

題型:多項選擇題

Which of the following are supported in Cisco Global Site Selector? ()

題型:多項選擇題

A Cisco UCS fabric interconnect in end-host mode learns MAC addresses on which port types?()

題型:多項選擇題

An administrator is creating a service profile but receives an error when applying to a blade. The administrator checks the faults tab of the service profile and finds the following error (Refer to the exhibit).What is the cause of this error?()

題型:單項選擇題

What is the purpose of this command in a Cisco Application Control Engine?() switch/Admin# show np 1 me-stats "-F0 v" 

題型:單項選擇題