Refer to the exhibit. Look at the command output. What would be the most probable reason for this port-ID mismatch?()
A.spanning-tree misconfiguration
B.speed mismatch configuration
C.cabling problem
D.configuration problem
您可能感興趣的試卷
你可能感興趣的試題
Refer to the exhibit. According to the output of the command show tag-switching forwarding-table, which four of these statements are true?()
A.Packets to the IP address 10.10.10.5/32 will be tagged with "17" toward the next hop.
B.Label "19" will be advertised to MPLS neighbors so that they can use this label to reach the IP address 10.10.10.6/32.
C.IP address 10.10.10.4/32 is directly connected to the neighbor router on serial 3/0.
D.Packets arriving with label "17" will be forwarded without any label toward serial 4/0.
E.Packets arriving with label "20" will be forwarded with label "21" after label-swapping.
F.Label "20" is advertised to MPLS neighbors so that they can use this information to reach the prefix 10.10.10.8/32.
A.Incorrect VTP domain
B.Incorrect VTP password
C.Incorrect VTP mode
D.Incorrect VTP configuration revision
A.Clear the MAC address table in the switch.
B.Clear the ARP cache in the switch.
C.Clear the ARP cache in the end devices.
D.Clear the ARP cache in the application servers.
最新試題
DHCP SERVER在給一個網段設置POOL時,該網段路由器接口地址能不能放入POOL,能why,不能why。
什么是NAT?
What is method list for configure aaa?
As a CCNA candidate,you must have a firm understanding of the IPv6 address structure.Refer to IPv6 address,could you tell me how many bits are included in each filed?()
The Frame Relay network in the diagram is not functioning properly.What is the cause of the problem?()
hsrp speak狀態是什么意思?
兩ebgp鄰居發路由過來 ,哪些屬性重置?
A network administrator is troubleshooting the OSPF configuration of routers R1 and R2.The routers cannot establish an adjacency relationship on their common Ethernet link.The graphic shows the output of the show ip ospf interface e0 command for routers R1 and R2.Based on the information in the graphic,what is the cause of this problem?()
R1 will choose which path to reach 10.1.0.0?
SPT初始狀態之后的一個狀態是什么?