A. In the blade BIOS
B. In the operating system
C. In the service profile
D. In the card option ROM
您可能感興趣的試卷
你可能感興趣的試題
A. The QoS policy assigns a system class to the outgoing traffic for a vNIC or vHBA.
B. Flow-control policies determine whether the uplink Ethernet ports in a Cisco UCS environment send and receive IEEE 802.3x pause frames when the send buffer for a port fills.
C. If no system class is configured as CoS 0， the Fibre Channel system class is used.
D. The user can configure QoS for these system classes： platinum， gold， silver， best effort， Fibre Channel.
E. When configuring a system class， the type of adapter in a server may limit the maximum MTU supported.
A. boot policy and BIOS policy
B. disk scrub and boot policy
C. BIOS setting scrub， boot policy， and BIOS policy
D. disk scrub and BIOS setting scrub
A. name
B. best-effort
C. burst
D. rate
E. host control
A. logical configuration
B. all configuration
C. full state
D. system configuration
A. If disk scrub is enabled， all BIOS settings for the server are erased.
B. If disk scrub is enabled， all the data access on any local drives is destroyed.
C. If disk scrub is enabled， the LSI active RAID is destroyed but data is still preserved.
D. If disk scrub is disabled， all data on any local drives is preserved， including the local storage configuration.
E. If disk scrub is enabled， all data on any local drives is preserved， including the local storage configuration.
最新試題
On a Cisco Unified Computing System （UCS）， which two statements regarding Ethanalyzer are true？（）
Given the following output： san-port-channel 12 is up Hardware is Fibre Channel Port WWN is 24：0c：00：0d：ec：d3：5c：00 Admin port mode is NP， trunk mode is on Port mode is NP Port vsan is 1 Speed is 8 Gbps Member[1] ： fc2/3 Member[2] ： fc2/4 What does "Speed is 8 Gbps" indicate？（）
Which GSS "source access list" is used to allow access to GSS by clients when GSS is being used as the DNS？（）
What interface is created when an FC Port Channel is created on a Cisco Unified Computing System？（）
Which two statements about end-host mode in SAN connectivity in a Cisco UCS environment are true？ （）
Your company wants Server 1/eth0 （vNIC 1） configured so that it always uses Fabric Interconnect A Port Channel 1 （Po1） when it communicates with anything outside of the Cisco UCS domain. However， if vNIC 1 fails over to Fabric Interconnect B using fabric failover， then vNIC 1 can any uplink port on Fabric Interconnect B. Which statements are true？ （）
A Cisco UCS fabric interconnect in end-host mode learns MAC addresses on which port types？（）
When testing ICMP access to a functional load-balancing ACE VIP， it fails. What is the reason of this problem？ （）
Which is true when describing a connection replication in Cisco ACE？（）
Refer to the exhibit.The Cisco UCS domain is operating in switching mode. A network administrator notices that no traffic is traversing the uplinks on Fabric Interconnect B （Path C）. Which actions might be used to change this behavior？（）