A.Action Management
B.Fault Management
C.Configuration Management
D.Protocol Management
E.Security Management
您可能感興趣的試卷
你可能感興趣的試題
Network Topology Exhibit：
Configuration Exhibit：
NET（config）# access-list 112 deny icmp any any echo log
NET（config）# access-list 112 deny imp any any redirect log
NET（config）# access-list 112 deny icmp any any mask-request log
NET（config）# access-list 112 permit icmp any 10.1.1.0 0.0.0.255
NET（config）# interface Fa0/1
NET（config-if）# ip access-group 112 in
You work as a network administrator at networkTut.com， study the exhibit carefully. The
configuration has been applied to router NET to mitigate the threat of certain types of ICMPbasedattacks while allowing some ICMP traffic to the corporate LAN to work. However， the configurationis incorrect. On the basis of the information in the exhibit， which configuration option wouldcorrectly configure router NET？（）
A.The first three statements of ACL 112 should have permitted the ICMP traffic and the laststatement should deny the identified traffic
B.The last statement of ACL 112 should have been "access-list 112deny icmp any 10.2.1.00.0.0.255"
C.The last statement of ACL 112 should have been "access-list 112permit icmp any 10.2.1.00.0.0.255"
D.ACL 112 should have been applied to interface Fa0/0 in an inbound direction
E.The last statement of ACL 112 should have been "access-list 112deny icmp any 10.1.1.00.0.0.255"
F.ACL 112 should have been applied to interface Fa0/1 in an outbound direction
G.None of the above
Study the exhibit carefully.
Routers A and B are customer routers. Routers 1， 2， 3 and 4 are provider routers. The routers areoperating with various IOS versions. Which frame mode MPLS configuration statement is true？（）
A.Before MPLS is enabled， the ip cef command is only requited on routers 1 and 4
B.After MPLS is enabled， the ip cef command is only required on routers 1 and 4
C.Before MPLS is enabled， the ip cef command is only required on the Ethernet 0 interfaces ofrouters 1 and 4
D.After MPLS is enabled， the ip cef command is only required on the Ethernet 0 interfaces ofrouters 1 and 4
E.Before MPLS is enabled， the ip cef command must be applied to all provider routers
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clickingthe numbers to the left of each question. In order to complete the questions， you will need to referto the SDM and the topology， neither of which is currently visible. To gain access to either thetopology or the SDK click on the button to left side of the screen that corresponds to the sectionyou wish to access. When you have finished viewing the topology the SDK you can return to yourquestions by clicking on the Questions button to the left.
Which IPSec rule is used for the Olympia branch and what does it define？（）
A.102
B.116
C.127
D.IP traffic sourced from 10.10.10.0/24 destined to 10.5.15.0/24 will use the VPN
E.IP traffic sourced from 10.10.10.0/24 destined to 10.8.28.0/24 will use the VPN
F.IP traffic sourced from 10.10.10.0/24 destined to 10.5.33.0/24 will use the VPN
A.Disable post scan
B.Use SSH or SSL
C.Enable trust levels
D.Deny echo replies on all edge routers
Authentication is the process of determining if a user or identity is who they claim to be. Refer tothe exhibit. Which statement about the authentication process is correct？（）
A.The LIST1 list will disable authentication on the console port
B.All login requests will be authenticated using the group tacacs+ method
C.The default login authentication will automatically be applied to all login connections
D.Because no method list is specified， the LIST1 list will not authenticate anyone on the consoleport
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clicking the numbers to the left of each question. In order to complete the questions， you will need to referto the SDM and the topology， neither of which is currently visible.
To gain access to either the topology or the SDK click on the button to left side of the screen thatcorresponds to the section you wish to access. When you have finished viewing the topology theSDK you can return to your questions by clicking on the Questions button to the left.
Which defined peer IP address an local subnet belong to Crete？（）
A.peer address 192.168.55.159
B.peer address 192.168.89.192
C.peer address 192.168.195.23
D.subnet 10.5.15.0/24
E.subnet 10.7.23.0/24
F.subnet 10.4.38.0/24
Study the exhibit carefully. The Cisco IOS IPsec High Availability （IPsec HA） Enhancementsfeature provides an infrastructure for reliable and secure networks to provide transparent availability of the VPN gateways - that is， Cisco IOS Software-based routers. What are the twooptions that are used to provide High Availability IPsec？（）
A.HSRP
B.Dual Router Mode （DRM） IPsec
C.IPsec Backup Peerings
D.RRI
IPSec VPN is a widely-acknowledged solution for enterprise network. What are the four steps tosetup an IPsec VPN？（）
A.A
B.B
C.C
D.D
最新試題
Drag the protocols that are used to distribute MPLS labels from the above to the target area on thebelow.（Not all options will be used）
Drag the IOS commands from the left that would be used to implement a GRE tunnel using the10.1.1.0.30 network on interface serial 0/0 to the correct target area on the right.
Network Topology Exhibit：Configuration Exhibit：NET（config）# access-list 112 deny icmp any any echo logNET（config）# access-list 112 deny imp any any redirect logNET（config）# access-list 112 deny icmp any any mask-request logNET（config）# access-list 112 permit icmp any 10.1.1.0 0.0.0.255NET（config）# interface Fa0/1NET（config-if）# ip access-group 112 inYou work as a network administrator at networkTut.com， study the exhibit carefully. Theconfiguration has been applied to router NET to mitigate the threat of certain types of ICMPbasedattacks while allowing some ICMP traffic to the corporate LAN to work. However， the configurationis incorrect. On the basis of the information in the exhibit， which configuration option wouldcorrectly configure router NET？（）
Match the xDSL type on the above to the most appropriate implementation on the below.
Drag the DSL technologies on the left to their maximum（down/up） data rate values on the below.
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clicking the numbers to the left of each question. In order to complete the questions， you will need to referto the SDM and the topology， neither of which is currently visible.To gain access to either the topology or the SDK click on the button to left side of the screen thatcorresponds to the section you wish to access. When you have finished viewing the topology theSDK you can return to your questions by clicking on the Questions button to the left.Which defined peer IP address an local subnet belong to Crete？（）
Which two encapsulation methods require that an 827 ADSL router be configured with a PPPusername and CHAP password？（）
cisco ios command to interface dialer 0
Refer to the exhibit. Which two statements about the AAA configuration are true？（）
Study this exhibit carefully. What information can be derived from the SDM firewall configurationdisplayed？（）