A.PIM sparse mode is being used.
B.PIM dense mode is being used.
C.The BGP multicast address family has not been configured.
D.IGMP version 3 is being used.
E.IP PIM neighbor filters have not been applied.
您可能感興趣的試卷
你可能感興趣的試題
A.The phones are not sending traffic with the correct DSCP value.
B.The Cisco CallManager is not marking the traffic correctly.
C.This is most likely a bug on the CE routers.
D.Your LAN QoS is incorrectly configured.
A.routing issue
B.denial-of-service attack
C.MAC flooding
D.spanning-tree recalculation
E.Layer 2 loop
F.ARP spoofing attack
A.LDAP
B.ICMP
C.RTP
D.BGP
E.SSH
F.RDP
A.qos-group
B.DSCP
C.LFI
D.NBAR
A.A sham-link is a logical link between PE routers that provides an OSPF adjacency between the PE routers and forwards customer traffic across it.
B.A sham-link is a logical link between PE routers that provides an OSPF adjacency between the PE routers and carries OSPF LSAs.
C.A sham-link is a logical link between PE routers that carries OSPF LSAs and forwards customer traffic across it.
D.A sham-link is a point-to-multipoint link that provides an OSPF adjacency between the PE routers and carries OSPF LSAs.
E.A sham-link is a point-to-multipoint link that provides an OSPF adjacency between the PE routers and forwards customer traffic across it.
最新試題
When a BGP router is not capable of understanding 4-byte AS numbers， it will see 4-byte AS numbers as a special， reserved， 2-byte AS number in the AS path. Which 2-byte AS number is this reserved one？（）
What does a unicast prefix-based IPv6 multicast address start with？（）
Internet Protocol version 6 （IPv6） is the next-generation Internet Layer protocol for packet-switched internetworks and the Internet. IPv6 router solicitation is（）
Which statement best describes OSPF external LSAs （type 5）？（）
Which QoS mechanism can help classify different kinds of Citrix traffic （print job versus real-time terminal control）？（）
Which IOS security feature is configured by the ip inspect inspection-name {in out} command？（）
What does the OSPF command capability vrf-lite achieve？（）
Two directly connected routers， R1 and R2， are both configured for OSPF graceful restart. R2 is able to switch packets in hardware， but R1 is not. If a network administrator logs on to R2 and performs a system reload， which will be the result？（）
When two bridges are competing for the root bridge of an IEEE 802.1D spanning tree and both have the same bridge priority configured， which parameter determines the winner？（）
f a Cisco switch is configured with VTPv1 in transparent mode， what is done with received VTP advertisements？（）