A.show tag-switching tdp binding 1.1.1.0/24
B.show tag-switching tdp bindings neighbor 1.1.1.0
C.show tag-switching interface e0/0
D.A and B both will show the binding.
E.All of the above.

A.LLQ supports the addition of strict priority queuing
B.With LLQ， bandwidth allocations for the priority queue and all the CBWFQ queues areconfigured using the priority command
C.LLQ is configured using MQC and CBWFQ is configured using the fair-queue command
D.LLQ priority queue bandwidth is policed with a congestion aware policer
E.LLQ does not support WFQ on the default traffic class （class-default）

A.Dynamic address mapping uses Frame Relay Inverse ARP to request the next-hop protocol address for a specific connection on its known DLCI
B.Responses to Inverse ARP requests are entered in an address-to-DLCI mapping table on the router or access server which is used to supply the next-hop protoco address or the DLCI for outgoing traffic
C.Inverse ARP is enabled by default for all protocols enabled on the physical interface
D.Inverse ARP is configured using the following command under the Interface configuration ’frame-relaymap dlci （dlci number） protocol protocol-address’
E.Inverse ARP in Frame-Relay is synonymous of ARP in Ethernet

A.additive
B.none
C.no-export
D.no-advertise
E.local-as

A.When you want to drop excess traffic above the CIR
B.When there is a speed mismatch between the central site and the remote site
C.When using Frame Relay SVCs
D.When over-subscribing the central site link
E.When LLQ is implemented on the Frame Relay PVC
F.When Multilink PPP LFI is implemented on the Frame Relay PVC