A. RIPng allows for routes with up to 30 hops.
B. RIPng is enabled on each interface separately.
C. RIPng uses broadcasts to exchange routes.
D. There can be only one RIPng process per router.
您可能感興趣的試卷
你可能感興趣的試題
A. tunneling
B. hashing
C. routing
D. NAT
A. NIC
B. BIA
C. OUI
D. VAI
A. Connect a router on a local network.
B. Connect a router to another router.
C. Allow distribution of routes between networks.
D. Translate a private IP address.
E. Connect a network to the Internet.
A. Addresses in a private range will be not routed on the Internet backbone.
B. Only the ISP router will have the capability to access the public network.
C. The NAT process will be used to translate this address in a valid IP address.
D. Several automated methods will be necessary on the private network.
E. A conflict of IP addresses happens, because other public routers can use the same range.
A. 10.180.48.224
B. 9.255.255.10
C. 192.168.20.223
D. 172.16.200.18
最新試題
Which command is used to display the collection of OSPF link states?()
Which encapsulation type is a Frame Relay encapsulation type that is supported by Cisco routers?()
Three switches are connected to one anther via trunk ports.Assuming the default switch configuration,which switch is elected as the root bridge for the spanning-tree instance of vlan 1?()
What is the default administrative distance of OSPF?()
How are VTP advertisements delivered to switches across the network?()
After the show ip route command has been entered,the follwing routes are displayed.Which route will not be entered into the routing table of a neighboring router?()
At which layer of the OSI model dose PPP perform?()
What is the result of issuing the frame-relay map ip 192.168.1.2 202 broadcast command?()
The network administrator cannot to switch 1 over a telnet session,although the hosts attached to switch 1 can ping the interface Fa0/0 of the router.Given the information in the graphic and assuming that the router and switch2 are configured properly,which of the following commands should be issued on switch 1 to correct this problem?()
Which statement describes the rule of split horizon?()