A. Adjust the default hello timers to three seconds for aggressive mode.
B. Enable it in global mode and on every interface you need to support.
C. Enable it in global mode to support every individual fiber-optic interface.
D. Enable it to create channels containing up to eight parallel links between switches.
E. Enable it in global mode to support every individual fiber optic and Ethernet interface.
您可能感興趣的試卷
你可能感興趣的試題
A. use ISL encapsulation
B. use 802.1q encapsulation
C. set ISL to desirable and auto with encapsulation negotiate to support ILS protocol negotiation
D. use VTP server mode to support dynamic propagation of VLAN information across the network
E. set DTP to desirable and desirable with encapsulation negotiate to support DTP protocol negotiation.
A. to ensure a loop-free topology
B. to protect against user-side loops
C. in order to support business applications
D. because of the risk of lost connectivity without STP
E. for the most deterministic and highly available network topology
A. when HSRP is not supported by the design
B. when multiple vendor devices need to be supported
C. when preempt tuning of the default gateway is needed
D. when a robust method of backing up the default gateway is needed
E. when the design implements Layer 2 between the access switch and the distribution switch
F. when the design implements Layer 3 between the access switch and the distribution switch
A. map the Layer 2 VLAN number to the Layer 3 subnet
B. control route propagation to edge switches using distribute lists
C. use a Layer 2 distribution interconnection link with HSRP or GLBP
D. use a Layer 3 distribution interconnection link with HSRP or GLBP
E. use equal-cost Layer 3 load balancing on all links to limit the scope of queries in EIGRP
A. It will only become active after a software failure.
B. It will only become active after a hardware failure.
C. It requires that Cisco NSF be enabled in order to work successfully.
D. It synchronizes the MAC, FIB, and adjacency tables between Active and Standby Route Processors.
最新試題
What will an Easy VPN hardware client require in order to insert its protected network address when it connects using network extension mode?（）
What amount of cell overlap ensures smooth roaming for wireless endpoints?（）
What is the recommended radius of a cell for a voice-ready wireless network?（）
During consultation, you find that a customer has only a single asset closet and is looking for a solution that is easy to deploy. Which NAS physical deployment model would you suggest to this customer?（）
Which two of these are advantages of placing the VPN device parallel to the firewall?（）
Please match the Cisco STP enahancement term to its definition.（）(1) BPDU guard(2) PortFast(3) BackboneFast(4) Loop guard(5) Root guard(a) shuts down a port that receives a BPDU when enabled(b) cuts convergence time by mas-age for indirect failure(c) prevents the aliernate or root port from being designated in absence of BPDUs(d )causes Layer 2 LAN interface access port to immediately enter the forwarding state(e) helps prevent bridging loops due to jni-directional link failures on point-to-point links
As an experienced technician, you are responsible for Technical Support. Which of the following descriptions is correct about the characteristic of SLB one arm mode?（）
An organization hires a contractor who only needs access to email and a group calendar. They do not need administrator access to the computer. Which VPN model is the most appropriate?（）
The Cisco NAC Appliance is able to check which three items before allowing network access?（）
Client traffic is being bridged through LAN interfaces on two WLCs. Which roaming option will keep them on the same IP subnet?（）