A. Troubleshooting is more complicated.
B. Service and switch modules are underutilized.
C. Layer 2 adjacency is required with the servers that use this design.
D. Layer 3 adjacency is required with the servers that use this design.
E. Load balancing will always occur across both access layer uplinks.
您可能感興趣的試卷
你可能感興趣的試題
A. Summarize data center subnets.
B. Use passive interfaces to ensure appropriate adjacencies.
C. Tune the EIGRP timers to enable EIGRP to achieve quicker convergence.
D. Adjust the default bandwidth value to ensure proper bandwidth on all links.
E. Advertise a default summary route into the data center core from the aggregation layer.
A. Never use passive interfaces.
B. Use NSSA areas from the core down.
C. Use totally stub areas to stop type 3 LSAs.
D. Use the lowest Ethernet interface IP address as the router ID.
E. Tune OSPF timers to enable OSPF to achieve quicker convergence.
A. Server-to-server traffic always remains in the core layer.
B. The recommended practice is for the core infrastructure to be in Layer 3.
C. The boundary between Layer 2 and Layer 3 should be implemented in the aggregation layer.
D. The Cisco Express Forwarding hashing algorithm is the default, based on the IP address and Layer 4 port.
E. Core layer should run BGP along with an IGP becauseiBGP has a lower administrative distance than any IGP.
A.ASM
B.BiDirPIM
C.PIM-SMRP
D.RP-Switchover
E.SourceSpecificMulticast
A. 0
B. 1
C. 2
D. 4
E. 16
F. infinity
最新試題
What amount of cell overlap ensures smooth roaming for wireless endpoints?（）
Which signal and noise values will result in the best phone communication with an access point?（）
During consultation, you find that a customer has only a single asset closet and is looking for a solution that is easy to deploy. Which NAS physical deployment model would you suggest to this customer?（）
During consultation, you find that a customer has multiple asset closets and will be adding more in the future. Which NAS physical deployment model would you suggest to this customer?（）
You are the Cisco Network Designer. Which of these is least important when determining how many users a NAS can support?（）
In which NAS operating mode are ACL filtering and bandwidth throttling only provided during posture assessment?（）
One of your customers has deployed a Layer 3 gateway in the untrusted network. Which gateway mode is appropriate for this customer?（）
What will an Easy VPN hardware client require in order to insert its protected network address when it connects using network extension mode?（）
The Cisco NAC Appliance is able to check which three items before allowing network access?（）
What is the recommended radius of a cell for a voice-ready wireless network?（）