單項選擇題PassGuide has a BGP network and a BGP route of 197.22.129.0/24 that should be propagated to all of the devices. The route is currently not in any of the routing tables. The PassGuide administrator determines that an access list is the cause of the problem. The administrator changes the access list to allow this route, but the route still doesnot appear in any of the routing tables. What should be done to propagate this route()

A.Use the service-policy command to adjust the QOS policy to allow the route to propagate.
B.Clear the BGP session.
C.Use the release BGP routing command.
D.Change both the inbound and outbound policy related to this route.
E.None of the other alternatives apply


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題

The network is shown below, along with the relevant router configurations:

With the topology found in the graphic, what will the R1 loopback 0 be in the R3 routing table?()

A.It will show up in the routing table as D 10.0.0/8
B.It will show up in the routing table as D EX 10.0.0.0/8
C.It will show up in the routing table as D 10.0.0./24
D.It will not show up in R3 routing table because there is no network command on R1

2.單項選擇題Which IOS command would you enter if you wanted to view a list of IBGP and EBGP neighbor relationships that are configured()

A.show ip bgp
B.show ip bgp paths
C.show ip bgp peers
D.show ip bgp summary
E.show ip bgp protocols

5.多項選擇題EIGRP is being used as the routing protocol on the company network. While troubleshooting somenetwork connectivity issues, you notice a large number of EIGRP SIA (Stuck in Active) messages.What causes these SIA routes?()

A.The neighboring router stops receiving ACK packets from this router
B.The neighboring router starts receiving route updates from this router
C.The neighboring router is too busy to answer the query (generally caused by high CPUutilization)
D.The neighboring router is having memory problems and cannot allocate the memory to processthe query or build the reply packet

最新試題

Drag each element of the Cisco IOS Firewall Feature Set from the above and drop onto itsdescription on the below.

題型:?jiǎn)柎痤}

Which statement correctly describes IPsec VPN backup technology?()

題型:?jiǎn)雾?xiàng)選擇題

Drag the DSL local loop topic on the left to the correct descriptions on the right.

題型:?jiǎn)柎痤}

Router NetworkTut is configured as shown below:Given the above configuration, which statement is true?()

題型:?jiǎn)雾?xiàng)選擇題

You need to configure a GRE tunnel on a IPSec router. When you are using the SDM to configurea GRE tunnel over IPsec, which two parameters are required when defining the tunnel interfaceinformation?()

題型:多項選擇題

Drag and drop each management protocol on the above to the correct category on the below.

題型:?jiǎn)柎痤}

In computer security, AAA stands for authentication, authorization and accounting. Which optionabout the AAA authentication enable default group radius enable command is correct?()

題型:?jiǎn)雾?xiàng)選擇題

Network Topology Exhibit:Configuration Exhibit:NET(config)# access-list 112 deny icmp any any echo logNET(config)# access-list 112 deny imp any any redirect logNET(config)# access-list 112 deny icmp any any mask-request logNET(config)# access-list 112 permit icmp any 10.1.1.0 0.0.0.255NET(config)# interface Fa0/1NET(config-if)# ip access-group 112 inYou work as a network administrator at networkTut.com, study the exhibit carefully. Theconfiguration has been applied to router NET to mitigate the threat of certain types of ICMPbasedattacks while allowing some ICMP traffic to the corporate LAN to work. However, the configurationis incorrect. On the basis of the information in the exhibit, which configuration option wouldcorrectly configure router NET?()

題型:?jiǎn)雾?xiàng)選擇題

This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clickingthe numbers to the left of each question. In order to complete the questions, you will need to referto the SDM and the topology, neither of which is currently visible. To gain access to either thetopology or the SDK click on the button to left side of the screen that corresponds to the sectionyou wish to access. When you have finished viewing the topology the SDK you can return to yourquestions by clicking on the Questions button to the left.Which IPSec rule is used for the Olympia branch and what does it define?()

題型:多項選擇題

Match the xDSL type on the above to the most appropriate implementation on the below.

題型:?jiǎn)柎痤}