A.Create an IPv4 tunnel and assign the tunnel IPv6 addresses
B.Create IPv4 interfaces on both ends of the network， and use either static routes or a routingprocess to direct IPv6 packets through those interfaces
C.IPv6 packets cannot be encapsulated with IPv4 headers because the addresses are notcompatible
D.Create IFV6 interfaces on both ends of the network， and use static routes to point the IPv4address to those interfaces
E.Use an IPv6 routing protocol like OSPFv3 and assign IPv4 packets to that process
F.Create an IPv4 tunnel and use the tunnel mode ipv6ip command
您可能感興趣的試卷
你可能感興趣的試題
A.show ip route ∣ to tftp：//192.168.1.1/route.txt
B.show ip route ∣ tee tftp：//192.168.1.1/route.txt
C.show ip route ∣ include tftp：//192.168.1.1/route.txt
D.show ip route ft include tJtp：//19Z168.1.1/route.txt
E.show ip route ∣ redirect tftp：//192.168.1.1/route.txt
A.Link-local address used for next-hop addresses
B.Interface can be added to RIP routing process in either interface configuration mode or in routerconfiguration mode
C.Uses a multicast to send routing updates
D.Use hop count as a metric
E.Distance-vector routing protocol
F.Maximum hop count is 15 with 16 being "unreachable"
A.The default-metric command configured under the appropriate interface
B.The metric parameter in the network command of a routing process
C.The metric parameter in the redistribute command
D.The default-metric command
E.A route-map containing a seed command
F.A route map containing a metric command
A.Designated port
B.Nonswitch port
C.Switch port
D.Nonroot port
E.Nondesignated port
F.Root port
A.show ip eigrp topology
B.show ip eigrp adjacency
C.show ip eigrp routes
D.show ip eigrp database
E.show ip route eigrp
F.show ip eigrp forwarding
最新試題
Authentication is the process of determining if a user or identity is who they claim to be. Refer tothe exhibit. Which statement about the authentication process is correct？（）
Router NetworkTut is configured as shown below：Given the above configuration， which statement is true？（）
Match the xDSL type on the above to the most appropriate implementation on the below.
Drag and drop each function on the above to the hybrid fiber-coaxial architecture component that itdescribes on the below.
As a network engineer， do you know for what purpose SDM uses Security Device Event Exchange（SDEE）？（）
cisco ios command to interface dialer 0
IPSec VPN is a widely-acknowledged solution for enterprise network. What are the four steps tosetup an IPsec VPN？（）
Drag the protocols that are used to distribute MPLS labels from the above to the target area on thebelow.（Not all options will be used）
Drag and drop the steps in the process for provisioning a cable modem to connect to a headendon the above to the below in the order defined by the DOCSIS standard.
Which three statements accurately describe IOS Firewall configurations？（）