單項選擇題

Refer to the exhibit. Which configuration would correctly enable Host A to acquire an IP address from the DHCP server that is located at 10.1.2.10/24? ()

A.ASw1(config)# interface range FastEthernet 0/1  -  24   ASw1(config - if - range)# ip forward - protocol udp 67   ASw1(config - if - range)# ip forward - protocol udp 68
B.ASw1(config)# interface range FastEthernet 0/1  -  24   ASw1(config - if - range)# ip helper - address 10.1.2.10
C.RTA(config)# interface fastethernet0/0   RTA(config -if)# ip forward- protocol udp 67   RTA(config - if)# ip forwar d- protocol udp 68
D.RTA(config)# interface fastethernet0/1   RTA(config -if)# ip forward- protocol udp 67   RTA(config -if)# ip forward- protocol udp 68
E.RTA(config)# interface fastethernet0/0   RTA(config - if)# ip helper - address 10.1.2.10
F.RTA(config)# in terface fastethernet0/1   RTA(config - if)# ip helper - address 10.1.2.10


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題Using the rules for IPv6 addressing, how can t he address 2031:0000:240F:0000:0000:09C0:123A:121B be rewritten?()

A. 2031:0:240F::09C0:123A:121B
B. 2031::240F::09C0:123A:121B
C. 2031::240F:9C0::123A:121B
D. 2031::240F:::09C0:123A:121B

2.單項選擇題

Refer to the exhibit. Which statement is true about the router configuration that is shown ?Select the best response.()

A. Additional DHCP options will be imported from another DHCP server.
B. The DHCP server pools need to be bound to an interface to operate.
C. This configuration will provide IP configuration information to two different su bnets.
D. Additional DCHP option information needs to be imported from another DHCP server.
E. If the router hands out all the addresses in pool 1, then it will supply addresses from pool 2.

3.單項選擇題

Refer to the exhibit. Which statement is true about the configuration?()

A. Hosts belonging to DHCP pool  1 and pool 2 will retain their IP settings for 30 hours before they must renew.
B. Hosts will receive IP settings from pool 1 until the addresses run out, and then hosts will receive the settings from pool 2.
C. Hosts in the 10.10.20.0/24 subnet will u se 10.10.20.50 as its DNS server.
D. DHCP pool 0 needs to have the ip dhcp excluded - address command to exclude the default router and DNS servers.

4.多項選擇題Which three options are supported as address allocation mechanisms for DHCP on Cisco routers?()

A. The IP address can be automatically assigned to a host.
B. The IP address can be assigned as a random hash value of the burned - in - address of the lowest - numbered LAN interface on the router.
C. The network administrator can assign a speci fic IP address to a specific host MAC address.
D. The IP address can be assigned from configured pools in a reverse lexicographical order.
E. The IP address can be assigned to a host for a limited time or until the host explicitly releases the address.
F. The IP address can be assigned to a host until the host usurps the assigned value using its own dynamic override mechanism.

5.多項選擇題

Refer to the exhibit. On the basis of  the output, what two conclusions can be reached?()

A. The default administrative distance has been changed.
B. IS - IS is not enabled.
C. Three physical interfaces are taking part in integrated IS - IS.
D. IS - IS is not redistributing any oth er routing protocols.
E. There are two neighboring routers sending IS - IS routing information.
F. Address summarization is configured.

最新試題

Router R1 has two LAN interfaces and three serial interfaces enabled for IPv6. All the inte rfaces use link local addresses automatically generated by the router.Which of the following could be the link local address of R1's interface S0/0?()

題型:單項選擇題

Which of the following answers lists either a protocol or function that can be used by a host to dynamically learn its own IPv6 address?()

題型:多項選擇題

Which of the following must match for  two directly connected routers running OSPF to establish a neighbor adjacency?()

題型:多項選擇題

An Enterprise rou ter, Ent1, displays the following excerpt from the show ip bgp command. ENT1 has an eBGP connection to an ISP router with address 3.3.3.3 and an iBGP connection to a router with address 4.4.4.4. Which of the following is most likely to be true?()Network  Next Hop Metric LocPrf Weight Path*> 3.3.3.3 0 0 1 1 1 1 218 i

題型:單項選擇題

Look at the following configuration below and select the statements that are true.()RD2(config)#router ospf 100RD2(config - router)# distance 180 10.1.10.1 0.0.0.0 match - meRD2(config -router)#!RD2(config - router) #ip access - list standard match - meRD2(config - std - nacl)# permit host 172.16.0.0

題型:多項選擇題

A client host uses IPv4 to communicate with one ser ver and IPv6 to communicate with another.Which of the following IPv6 coexistence features is likely at work on the host?()

題型:單項選擇題

Router R1 currently has no configuration related to IPv6 or IPv4. The following configuration exists in a planning document, intended to be used to copy/paste into Router R1 to enable RIPng and IPv6 on interfaces F0/0 and S0/0/0. No other related configuration exists. Which of the following is true about RIPng on R1 after this configuration has been pasted into R1?()ipv6 unicast- routinginterface f0/0ipv6 rip one enableipv6 address 2000::1/64interface s0/0/0ipv6 address 2001::/64 eui - 64ipv6 rip one enable

題型:單項選擇題

The following output occurs on Router R1 , which runs both EIGRP for IPv6 and OSPFv3, with redistribution from EIGRP into OSPF configured with the redistribute eigrp 1 metric 25 command. Interface S0/0/1 has been enabled for EIGRP ASN 1. Which of the following should be true of redistribution in  this case?()D 2000::/64 [90/1422516]via FE80::213:19FF:FE7B:5026, Serial0/0/1C 2000:0:0:1::/64 [0/0]via Serial0/0/1, directly connectedL 2000::1:213:19FF:FE7B:5004/128 [0/0]via Serial0/0/1, receive

題型:單項選擇題

An enterprise has plans to start adding IPv6 support. The initial deployment requires support from some IPv6 - only device s that need to access servers that support only IPv4.Which of the following tools would be most appropriate?()

題型:單項選擇題

Router R1 currently has no configuration related to IPv6 or IPv4. The following configuration exists in a planning document, intended to be used to copy/paste into Router R1 to enable OSPFv3 on interfaces F0/0 and S0/0/0. No other related configuration exists. Assuming F0/0 and S0/0/0 reach an up/up state, which of the following is true about OSPFv3 on R1 after this configuration has been pasted into R1?()ipv6 router ospf 1ipv6 unicast- routinginterface f0/0ipv6 address 2000 ::1/64ipv6 ospf 1 area 1interface s0/0/0ipv6 address 2001::/64 eui - 64ipv6 ospf 1 area 0

題型:單項選擇題