單項選擇題The tag timeout value for a cisco wireless location appliance should be set to which tag beacon rate?()

A.4 to 6 times the tag beaconing rate
B.10 to 12 times the tab beaconing rate
C.8 to 10 times the tag beaconing rate
D.6 to 8 times the tag beaconing rate


您可能感興趣的試卷

你可能感興趣的試題

2.單項選擇題

A client roams from h-reap ap1 to h-reap ap2. the client is unable to associate to h-reap ap2. h-reap ap2 has six other clients associated to it, which continue to pass traffic.
What has caused this problem?()

A.h-reap ap1 has reached its client limit.
B.h-reap ap2 has reached its client limit.
C.h-reap ap2 lost its connection to the controller.
D.h-reap ap1 lost its connection to the controller.

3.單項選擇題

You are trying to change the polling parameters used by the location manager via the cisco wcs, and your request is being denied.
What is wrong?()

A.polling values can be changed only in the maintenance window.
B.polling values can be changed only on the location server.
C.your login does not have the correct permissions.
D.you must wait for the location server to become available.

5.單項選擇題

On a cisco 1000 series controller-based access point,the alarm led is flashing red,but the other leds are off.
What is this access point indicating?()

A.its ip address already exists.
B.it is operating normally.
C.it requires a code upgrade.
D.it has lost contact with the controller.

最新試題

You are using ADU and are authenticated and associated to an access point. However, you are unable to obtain an IP address.Which of these has caused this problem?()

題型:單項選擇題

You have a very few Cisco 7920 wireless IP phones on your network, but lots of wireless laptops.You want to increase the bandwidth available for the laptops by decreasing the bandwidth reserved for the Cisco 7920 phones.What is the lowest percentage of voice-allocated bandwidthyou can select on the WLAN controller?()

題型:單項選擇題

You have just finished aligning a Cisco Aironet 1400 Series Wireless Bridge link using installationmode. When you set the link back to operational mode you loose association to the root bridge.Which action will correct the problem?()

題型:單項選擇題

What is the maximum number of wireless controllers that the highest-end Cisco WCS server canmanage?()

題型:單項選擇題

A Cisco WCS version 4.0 has been installed on a server with a dual Pentium 3.0 GHz processor,4GB RAM, and an 80 GB hard drive. A location appliance has been incorporated into the networkand is being monitored by the Cisco WCS. There are 3000 devices to be tracked but not all of themare being tracked on the Cisco WCS.What can be done to correct the problem?()

題型:單項選擇題

You are configuring a wireless LAN controller for QoS.Which 802.11e user priority tag should you apply to voice applications?()

題型:單項選擇題

You are troubleshooting a problem with a Cisco 7920 wireless IP phone that is causing the phoneto drop calls. The problem appears to be roaming bandwidth issue. In order to verify what kind ofissue it is, you decide to increase the bandwidth reserve for roaming on the WLAN controller tomaximum.What level do you set the bandwidth to?()

題型:單項選擇題

Which protocol does the RADIUS server use inside the secure tunnel of EAP-FAST to authenticatethe client when one-time passwords are in use?()

題型:單項選擇題

You are charges with implementing a secure wireless installation which will provide Internet accessto client devices but will not allow communications between wireless clients.In addition to implementing PSPF or peer-to-peer blocking on the wireless side,which of the following actionsshould you perform on the wired infrastructure?()

題型:單項選擇題

When configuring a WLAN controller for a voice application using Cisco 7920 wireless IP phones,which two general control settings should you select?()

題型:多項選擇題