A.Enable the IGMP snooping capability and define the IGMP timeout period.
B.Set the Ethernet multicast mode to Enabled， enable the IGMP snooping capability， and define the IGMP timeout period.
C.Set the multicast monitor function to Enabled， enable the IGMP snooping capability， and define the mandatory data rate to the minimum value supported.
D.Set the Ethernet multicast mode to Multicast and define the multicast group address.
您可能感興趣的試卷
你可能感興趣的試題
A.Browse to the phone using the MAC address of the phone.
B.Use HTTPS:// preceding the address of the phone.
C.Change web access to read/write for the MAC address of the phone on Cisco Unified Communications Manager.
D.Enter the username and password of the phone.
E.Ensure that the host is on the same subnet as the remote phone.
A.EAP-TLS
B.EAP-TTLS
C.EAP-SIM
D.PEAPv1/EAP-GTC
E.LEAP
A.Avoid channels with high AP co-channel interference.
B.Use channels with high AP co-channel interference to avoid channel roams.
C.Set the 2.4-GHz data rate of 5.5 Mb/s to required.
D.Use 5-GHz channels when possible.
E.Use 2.4-GHz channels when possible.
A.11 Mb/s
B.18 Mb/s
C.24 Mb/s
D.54 Mb/s
A.grants a VoWLAN client-initiated call based on the number of active clients associated to the accesspoint
B.grants a VoWLAN client-initiated call based on channel bandwidth capacity
C.uses the 802.11i specification
D.uses 802.11 action frames
E.requires a WMM-enabled client
最新試題
What is recommended for a wireless LAN infrastructure configuration when using SVP-version SpectraLink phones?（）
Which three actions are required to access the network statistics on a remote Cisco Unified Wireless IP Phone 7921G via a web browser?（）
Which statement describes the WLCv5.2 delivery of a multicast packet from a wired PC source on VLAN_X to a respective wireless client using SSID_X, using a WLAN controller enabled for multicast?（）
Which keypad sequence will reset the Cisco Unified Wireless IP Phone 7921 to factory default?（）
What is the recommended Cisco DSCP value for a switch or router passing Cisco Unified Wireless IP Phone 7921G RTP packets?（）
How do Cisco Unified Communications IP phones receive firmware upgrades?（）
Which statement describes the call behavior of the Cisco Unified Wireless IP Phone 7921G when it roams from 802.11b to 802.11a?（）
What is the Cisco recommended setting for the Cisco Unified Wireless Network WLC Voice Call Admission Control Max RF Bandwidth to support the Cisco Unified Wireless IP Phone 7921G?（）
When designing the coverage area for high call capacity, what two actions should be done with data rates and channels?（）
Which three are interframe spaces defined in 802.11?（）