A.disable auto rf and configure manually.
B.disable all 802.11b data rates.
C.power access point to full power.
D.hard code the channel.
您可能感興趣的試卷
你可能感興趣的試題
A.infrastructure devices to associate only to this ssid
B.enable ip redirection on this ssid
C.set data beacon rate
D.multiple basic service set identification （bssid）
E.set infrastructure ssid
A.eap-peap
B.eap-fast
C.eap-cisco wireless （leap）
D.eap-tls
E.eap-md5
A.15
B.10
C.1
D.5
You are conducting a cdp-based discovery using an edge switch for the seed. there is a router between the switch and the wlse. none of the access points are discovered， and the discovery log shows the switch is snmp unreachable.
What is the problem？（）
A.the snmp communities on the switch do not match the wlse.
B.the snmp communities on the access points do not match the wlse.
C.the snmp communities on the access points do not match the switch.
D.the snmp communities on the router do not match the wlse.
A.voip
B.rfid tags
C.data collection
D.802.11b and g clients
最新試題
If it is properly deployed， a controller-based access point is capable of monitoring all VLANs on anetwork when you select which of the following modes from the AP Mode drop-down menu onthe controller？（）
What is the maximum number of wireless controllers that the highest-end Cisco WCS server canmanage？（）
You review the Failed Attempts logs on an AAA server and find： "unknown network access servererror." Which failure could produce this error？（）
You are configuring an RF group of controllers that coordinate Radio Resource Management calculations.What is the maximum number of WLAN controllers that you can add？（）
When configuring a WLAN controller for a voice application using Cisco 7920 wireless IP phones，which two general control settings should you select？（）
When configuring Cisco Secure ACS to support wireless EAP authentication， which device must be configured as a AAA client？（）
On a Cisco Aironet 802.11 a/b/g wireless LAN client adapter，the status LED and activity LED are alternating on and off.What does this indicate？（）
On a WLAN controller， what is the default roaming bandwidth percentage reserved for voice clients？（）
An REAP was supporting 16 WLANs， but now it only supports one.What happened to cause the change？（）
You are charges with implementing a secure wireless installation which will provide Internet accessto client devices but will not allow communications between wireless clients.In addition to implementing PSPF or peer-to-peer blocking on the wireless side，which of the following actionsshould you perform on the wired infrastructure？（）