單項選擇題Which of the following statements explains why it is normally best to have more than onecontroller-based access point participate in the containment of one rogue access point?()

A.Clients connected to the rogue access point must be able to connect to the containmentcontroller-based access point.
B.Multiple controller-based access points will load-balance the containment task using fewerresourcesthan a single access point.
C.Clients connected to the rogue access point may be out of the range of the controller-basedaccess point providing containment.
D.Each controller-based access point can handle only a limited amount of clients connected tothe rogue access points.


您可能感興趣的試卷

你可能感興趣的試題

最新試題

You are configuring an RF group of controllers that coordinate Radio Resource Management calculations.What is the maximum number of WLAN controllers that you can add?()

題型:單項選擇題

You are installing a Cisco 4402 Series Wireless LAN Controller.What type of interface is used on the uplink port?()

題型:單項選擇題

On a Cisco Aironet 802.11 a/b/g wireless LAN client adapter,the status LED and activity LED are alternating on and off.What does this indicate?()

題型:單項選擇題

You are using ADU and are authenticated and associated to an access point. However, you are unable to obtain an IP address.Which of these has caused this problem?()

題型:單項選擇題

Which protocol does the RADIUS server use inside the secure tunnel of EAP-FAST to authenticatethe client when one-time passwords are in use?()

題型:單項選擇題

If it is properly deployed, a controller-based access point is capable of monitoring all VLANs on anetwork when you select which of the following modes from the AP Mode drop-down menu onthe controller?()

題型:單項選擇題

You are charges with implementing a secure wireless installation which will provide Internet accessto client devices but will not allow communications between wireless clients.In addition to implementing PSPF or peer-to-peer blocking on the wireless side,which of the following actionsshould you perform on the wired infrastructure?()

題型:單項選擇題

Static WEP is configured on the access point. You are authenticated and associated to the accesspoint but are unable to obtain an IP address.Which of the following will cause this problem?()

題型:單項選擇題

When configuring Cisco Secure ACS to support wireless EAP authentication, which device must be configured as a AAA client?()

題型:單項選擇題

Which of the following parameter sets must be configured on the Cisco Wireless Location Appliance?()

題型:單項選擇題