單項選擇題The tag timeout value for a Cisco Wireless Location Appliance should be set to which tag beaconrate?()

A.4 to 6 times the tag beaconing rate
B.10 to 12 times the tab beaconing rate
C.8 to 10 times the tag beaconing rate
D.6 to 8 times the tag beaconing rate


您可能感興趣的試卷

你可能感興趣的試題

2.單項選擇題

A client roams from H-REAP AP1 to H-REAP AP2. The client is unable to associate to H-REAPAP2.
H-REAP AP2 has six other clients associated to it,which continue to pass traffic.
What hascaused thisproblem?()

A.H-REAP AP1 has reached its client limit.
B.H-REAP AP2 has reached its client limit.
C.H-REAP AP2 lost its connection to the controller.
D.H-REAP AP1 lost its connection to the controller.

3.單項選擇題

You are trying to change the polling parameters used by the location manager via the Cisco WCS,andyour request is being denied.
What is wrong?()
 

A.Polling values can be changed only in the maintenance window.
B.Polling values can be changed only on the location server.
C.Your login does not have the correct permissions.
D.You must wait for the location server to become available.

5.單項選擇題

On a Cisco 1000 Series controller-based access point, the alarm LED is flashing red, but the otherLEDs are off.
What is this access point indicating?()

A.Its IP address already exists.
B.It is operating normally.
C.It requires a code upgrade.
D.It has lost contact with the controller.

最新試題

You have a very few Cisco 7920 wireless IP phones on your network, but lots of wireless laptops.You want to increase the bandwidth available for the laptops by decreasing the bandwidth reserved for the Cisco 7920 phones.What is the lowest percentage of voice-allocated bandwidthyou can select on the WLAN controller?()

題型:單項選擇題

You have just finished aligning a Cisco Aironet 1400 Series Wireless Bridge link using installationmode. When you set the link back to operational mode you loose association to the root bridge.Which action will correct the problem?()

題型:單項選擇題

A client roams from H-REAP AP1 to H-REAP AP2. The client is unable to associate to H-REAP AP2.H-REAP AP2 has six other clients associated to it, which continue to pass traffic.What has causedthis problem?()

題型:單項選擇題

What is the maximum number of wireless controllers that the highest-end Cisco WCS server canmanage?()

題型:單項選擇題

You are charges with implementing a secure wireless installation which will provide Internet accessto client devices but will not allow communications between wireless clients.In addition to implementing PSPF or peer-to-peer blocking on the wireless side,which of the following actionsshould you perform on the wired infrastructure?()

題型:單項選擇題

On a Cisco Aironet 802.11 a/b/g wireless LAN client adapter,the status LED and activity LED are alternating on and off.What does this indicate?()

題型:單項選擇題

Clients using Cisco-LEAP and EAP-FAST authentication are having no problems logging on to thewireless network, but clients using PEAP are failing to log on.Which situation would result in thistype of problem?()

題型:單項選擇題

Which of the following accurately represents the functionality of a lightweight access point configured to operate in sniffer AP mode?()

題型:單項選擇題

You are troubleshooting a one-way call problem with a Cisco 7920 wireless IP phone on a standalone WLAN.What may cause this problem?()

題型:單項選擇題

Which of the following commands on the wireless interface of a Cisco 3845 Integrated Service Router allows the SSID to broadcast?()

題型:單項選擇題