A.50
B.128
C.512
D.1024
您可能感興趣的試卷
你可能感興趣的試題
In a deployment using standalone access points， clients set up to authenticate with EAP-PEAP or EAP-Cisco Wireless （Cisco-LEAP） cannot authenticate. When you inspect the Failed Attempts report on theCisco Secure ACS， you find this error： "Unknown network access server NAS."
Which problem may havecaused this failure？（）
A.misconfigured EAP type on the access point
B.misconfigured EAP type on the AAA server
C.misconfigured IP address of the access point on the AAA server
D.misconfigured IP address of the AAA server on the access point
You are configuring a wireless LAN controller for QoS.
Which 802.11e user priority tag should you apply tovoice applications？（）
A.1
B.3
C.4
D.6
A.MS-CHAP v2
B.PAP
C.GTC
D.MD5
A.Wireless Control System
B.wireless clients
C.wireless controllers
D.controller-based access points
E.Location Appliance
A.4
B.8
C.16
D.32
最新試題
You are installing a Cisco 4402 Series Wireless LAN Controller.What type of interface is used on the uplink port？（）
You review the Failed Attempts logs on an AAA server and find： "unknown network access servererror." Which failure could produce this error？（）
You want to dynamically assign users to an 802.1Q VLAN as a result of their authentication. Inorder to accomplish this.Which two IETF RADIUS attributes should you configure on the CiscoSecure ACS？ （）
A mobility group is created by a Cisco WLCM and 4402 Series Wireless LAN Controller. A client thatis anchored on the Cisco WLCM roams to an access point on the 4402 controller. You then run adebug command on the 4402 controller.Which message would best describe the establishment ofthe tunnel from the foreign controller’s perspective？（）
A Cisco WCS version 4.0 has been installed on a server with a dual Pentium 3.0 GHz processor，4GB RAM， and an 80 GB hard drive. A location appliance has been incorporated into the networkand is being monitored by the Cisco WCS. There are 3000 devices to be tracked but not all of themare being tracked on the Cisco WCS.What can be done to correct the problem？（）
You have been called upon to add location-based services into an existing controller-basedwireless design which primarily encompasses handheld devices such as barcode scanners and Cisco7920 wireless IP phones.In which mode should you deploy the additional access points to achievethe density required without excessive co-channel interference？（）
When configuring Cisco Secure ACS to support wireless EAP authentication， which device must be configured as a AAA client？（）
A Cisco Wireless Location Appliance has been added to track RFID tags placed on laptops beingused in a school.Classrooms at the school have concrete block walls. During testing，you discoverthat the accuracy of the system needs to be improved.You decide to edit the map in the Cisco WCS to add the interior walls.How many interior walls can you add to improve the accuracy of thelocation appliance？（）
You are configuring an RF group of controllers that coordinate Radio Resource Management calculations.What is the maximum number of WLAN controllers that you can add？（）
The Cisco Wireless Location Appliance provides an audit trail for each device tracked for up to how many days？（）