A.device type and subnet
B.MAC address and device type
C.serial number and version number
D.serial number and subnet
您可能感興趣的試卷
你可能感興趣的試題
A.lost connection to the controller
B.duplicate IP address
C.startup
D.site survey mode
A.Enable Self-Healing.
B.Configure Location Manager.
C.Conduct Client Walkabout.
D.Conduct Radio Scan.
A.Disable Auto RF and configure manually.
B.Disable all 802.11b data rates.
C.Power access point to full power.
D.Hard code the channel.
A.Infrastructure devices to associate only to this SSID
B.Enable IP redirection on this SSID
C.Set Data Beacon Rate
D.Multiple Basic Service Set Identification （BSSID）
E.Set infrastructure SSID
A.EAP-PEAP
B.EAP-FAST
C.EAP-Cisco Wireless （LEAP）
D.EAP-TLS
E.EAP-MD5
最新試題
You are troubleshooting a one-way call problem with a Cisco 7920 wireless IP phone on a standalone WLAN.What may cause this problem？（）
When configuring a WLAN controller for a voice application using Cisco 7920 wireless IP phones，which two general control settings should you select？（）
A Cisco WCS version 4.0 has been installed on a server with a dual Pentium 3.0 GHz processor，4GB RAM， and an 80 GB hard drive. A location appliance has been incorporated into the networkand is being monitored by the Cisco WCS. There are 3000 devices to be tracked but not all of themare being tracked on the Cisco WCS.What can be done to correct the problem？（）
How many WLANs can a Cisco Aironet 1242 in H-REAP mode support when actively connected toa wireless controller？（）
A client roams from H-REAP AP1 to H-REAP AP2. The client is unable to associate to H-REAP AP2.H-REAP AP2 has six other clients associated to it， which continue to pass traffic.What has causedthis problem？（）
The Cisco Wireless Location Appliance provides an audit trail for each device tracked for up to how many days？（）
You are installing a Cisco Aironet 1000 Series controller-based access point. When you boot it， allthe LEDs on the access point blink together.What does this indicate about the access point？（）
You want to dynamically assign users to an 802.1Q VLAN as a result of their authentication. Inorder to accomplish this.Which two IETF RADIUS attributes should you configure on the CiscoSecure ACS？ （）
The IOS of a North American Cisco Aironet 1130AG Series standalone access point has becomecorrupt. You must therefore reload the TFTP firmware.Before you press and hold the MODEbutton， you should verify that the file name is which of the following？（）
A mobility group is created by a Cisco WLCM and 4402 Series Wireless LAN Controller. A client thatis anchored on the Cisco WLCM roams to an access point on the 4402 controller. You then run adebug command on the 4402 controller.Which message would best describe the establishment ofthe tunnel from the foreign controller’s perspective？（）