欧美日韩可乐视频,最新亚洲国产高清

單項選擇題It is a Rule requirement that the Owner should advise LR of any damage which may affect the classification of a ship and that all repairs necessary for the ship to retain her class are carried out to the satisfaction of the Surveyors. In which circumstances, the Owner/Master may not necessary report to the classification?（）

A、Portside anchor lost
B、Starboard auxiliary engine broken down
C、Fresh water cock in Kitchen found drip leaking
D、Cargo hold hopper plating cracked by grab

點擊查看答案

您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題Under regulation 6(2) of MARPOL Annex VI, ships constructed before 19 May 2005 shall be issued with the IAPP Certificate no later than the first scheduled dry docking after 19 May 2005, but in no case later than 19 May 2008. Ships flying the flag of a State which is not a Party to MARPOL Annex VI and which do not carry an IAPP Certificate after the above dates should be treated in accordance with chapter 3 of these Guidelines. Which deficiency listed below may not cause the detention of the vessel by PSC inspection?（）

A、Absence of valid IAPP Certificate, EIAPP Certificates or Technical Files
B、A diesel engine, with a power output of more than 130 kW, which is installed on board a ship constructed on or after 1 January 2000, or a diesel engine having undergone a major conversion on or after 1 January 2000, which does not comply with the NOx Technical Code
C、the sulphur content of any fuel oil being used on board exceeds 4.5% m/m
D、An incinerator installed on board the ship before 1 January 2000 does not comply with requirements contained in appendix IV to the Annex, or the standard specifications for shipboard incinerators developed by the Organization (resolutions MEPC.76(40) and MEPC.93(45))

點擊查看答案

2.單項選擇題Which method listed below is acceptable by classification society to perform hose testing to weather tight hatch covers and closing appliances（）

A、This is to be carried out at a maximum distance of 1,5m with a hose pressure not less than 2,0 kgf/cm2. The nozzle diameter is not to be less than 12mm.
B、This is to be carried out at a maximum distance of 1,5m with a hose pressure not less than 3,5 kgf/cm2. The nozzle diameter is not to be less than 5mm.
C、This is to be carried out at a maximum distance of 1,5m with a hose pressure not less than 4,0 kgf/cm2. The nozzle diameter is not to be less than 8mm.
D、This is to be carried out at a maximum distance of 2,0m with a hose pressure not less than 2,0 kgf/cm2. The nozzle diameter is not to be less than 12mm.

點擊查看答案

3.單項選擇題A safety management system that satisfies the requirements of the ISM Code is a system of prevention designed to prevent pollution and improve safety. The safety management system shall include the following functional requirements, please find out the non applicable function（）.

A、A safety and environmental protection policy;
B、Instructions and procedures to ensure safety operation of ships and protection of the environment in compliance with relevant international and flag state legislation
C、Provide a guarantee that there will never be another accident or technical defect
D、Defined levels of authority and lines of communication between and amongst, shore and shipboard personnel

點擊查看答案

4.單項選擇題Which narrative regarding loading software is incorrect?（）

A、The approved Loading Program could substituted the approved Loading Manual and/or Trim and Stability Booklet
B、A Loading Program is required to have General Approval by classification Society prior to being considered for use on a specific ship
C、Following a satisfactory installation test on board the ship the Surveyor will issue a Program Installation Test
D、A Loading Program may be provided as a classification requirement or as an Owner’s option

點擊查看答案

5.單項選擇題Which part as below don’t has direct interest in the safety of shipping and the welfare of seamen（）

A、Flag State
B、Ship owner
C、Ship chandler
D、Classification society

點擊查看答案