A.Surrounding the fixed shaft is a hollow shaft
B.This hollow shaft carries radial bores
C.Each bore is fitted with a well-lapped plunger
D.There are always even numbers of bores
您可能感興趣的試卷
你可能感興趣的試題
A.The cylindrical barrel is coupled to the motor
B.The cylindrical barrel has an odd number of bores
C.The bores end in sockets
D.The sockets fit in the swash plate
A.The rams work inside cylinders
B.The cylinders have glands sealing their open ends
C.The rams are connected to a cross-head
D.The cross-head is mounted on the rudder stock
A.keep the air from being carried into the engine
B.keep the moisture from being condensed
C.keep the danger from being carded into the engine
D.take away the condensate from the air
Which of the following operations need to be entered on the Oil Record Book Part I? ()
(1) Ballast of fuel oil tanks
(2) Condition of oil discharge monitoring and control system
A.(1)only
B.(2)only
C.both(1)and(2)
D.neither(1)nor(2)
Which of the following operations need to be entered on the Oil Record Book Part I?()
(1) Cleaning of fuel oil tanks
(2) Internal transfer of fuel oil
A.(1)only
B.(2)only
C.both(1)and(2)
D.neither(1)nor(2)
最新試題
If you are given the job of adding hydraulic fluid to a mooring winch, and are not certain as to the type of fluid to use, you should ().
The amount of fluid friction or internal friction inherent in a mineral lubricating oil is reflected as a measure of its ().
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be ().
Which of the following problems could cause the high pressure cutout switch to shut down the compressor in a refrigeration system?()
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump ().
The rate of heat transfer between the hot and cold fluids passing through a shell-and-tube type heat exchanger will ().
The general purpose of a heat exchanger is to ().
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by ().
When a refrigeration compressor has developed a high head pressure as a result of a refrigerant overcharge, you should ().
If the head pressure of a reciprocating refrigeration compressor is excessive, ().