A.fire-tubes
B.furnaces
C.water drums
D.water wall tubes
您可能感興趣的試卷
你可能感興趣的試題
A.The three moving vanes and the three fixed vanes form three pressure chambers
B.The three moving vanes and the three fixed vanes form six pressure chambers
C.The three moving vanes and the three fixed vanes form nine pressure chambers
D.The three moving vanes and the three fixed vanes form twelve pressure chambers
A.It is required that all ships are provided with two independent steering gear systems that is one main and one auxiliary
B.The auxiliary gear could be power operated in passenger ships
C.The auxiliary gear must be of adequate strength and sufficient to steer a ship at navigable speed
D.All moving parts of the steering gear must be guarded against any possible damage
A.Only one pump should be used at any time
B.The ship speed should be reduced to 70% of the normal
C.Watch keeping of the steering gear should be increased
D.Limitations of the steering gear should be logged but the bridge need not be informed
A.Surrounding the fixed shaft is a hollow shaft
B.This hollow shaft carries radial bores
C.Each bore is fitted with a well-lapped plunger
D.There are always even numbers of bores
A.The cylindrical barrel is coupled to the motor
B.The cylindrical barrel has an odd number of bores
C.The bores end in sockets
D.The sockets fit in the swash plate
最新試題
Who is responsible for ensuring that someone is assigned to close the watertight doors in an emergency?()
If the head pressure of a reciprocating refrigeration compressor is excessive, ().
If you are given the job of adding hydraulic fluid to a mooring winch, and are not certain as to the type of fluid to use, you should ().
Thermostatic expansion valves can be adjusted for ().
On tank vessels equipped with power operated cargo tank valves, the type of power operator most commonly used is ().
An increasing head pressure in a refrigeration system, without any corresponding change in the cooling water inlet temperature, would probably be caused by ().
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by ().
Which of the listed pumps is NOT a positive displacement pump?()
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be ().
The general purpose of a heat exchanger is to ().