A.transmit the rudder angle to the bridge indicator
B.prevent the control linkage from striking the stops when hard over
C.automatically purge all entrained air from the system
D.send hydraulic signals to the receiving unit
您可能感興趣的試卷
你可能感興趣的試題
A.horizontally mounted
B.never fitted with intake filters
C.fitted with intercoolers
D.operated in an unloaded condition at all times
A.High pressure compressors are more efficient than low pressure compressors
B.Mechanical efficiency divided by compressor efficiency will equal the overall efficiency of the compressor unit
C.Two stage compressors are generally more efficient than single stage compressors
D.The volumetric efficiency is decreased in multistage compressors
A.precipitation number
B.neutralization number
C.pour point
D.demulsibility
A.liquid strainer
B.refrigerant inlet of the condenser
C.inlet side of the evaporator
D.suction side of the compressor
A.Centrifugal
B.Gear
C.Propeller
D.Turbine
最新試題
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will ().
Thermostatic expansion valves can be adjusted for ().
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by ().
The major source of chemical contaminants in hydraulic fluid is ().
The amount of fluid friction or internal friction inherent in a mineral lubricating oil is reflected as a measure of its ().
The rate of heat transfer from a hot region to a cold region is affected most by the ().
An excessive charge of refrigerant in an air-cooled refrigeration system can cause ().
Who is responsible for ensuring that someone is assigned to close the watertight doors in an emergency?()
A salinity indicator is used to determine the ().
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by ().