A.cause loss of hydraulic oil from the system
B.result in extreme damage to the pump
C.cause damage to the pump ff not continually drained from the pump casing
D.result in the system high side pressure to substantially drop off
您可能感興趣的試卷
你可能感興趣的試題
A.saltwater heater shell
B.second-stage condenser
C.atmosphere
D.second-stage flash chamber
A.Ash content, carbon residue, and gravity
B.Viscosity, acidity, and demulsibility
C.Pour point, flash, point, and precipitation number
D.Auto-ignition point, viscosity index, and film strength
A.Protects against suction valve float
B.Provides a positive pressure on the air inlet valves
C.Prevents lubricating oil contamination of the compressed air supply
D.Protects against the damaging effects of airborne solid particles
A.warm-up allows the hydraulic system to become charged with oil
B.warm-up allows the relief valves to be properly tested
C.hydraulic strainers operate only during the warm-up period
D.hydraulic fluid must be at the proper viscosity
A.are exposed to a vacuum
B.come in contact with extremely hot surfaces
C.are reduced in temperature to just above the pour point
D.become extremely agitated or aerated
最新試題
The rate of heat transfer between the hot and cold fluids passing through a shell-and-tube type heat exchanger will ().
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by ().
The major source of chemical contaminants in hydraulic fluid is ().
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be ().
If the head pressure of a reciprocating refrigeration compressor is excessive, ().
The rate of heat transfer from a hot region to a cold region is affected most by the ().
Which of the problems listed would came the discharge temperature of an R-12 refrigeration compressor to increase?()
If you are given the job of adding hydraulic fluid to a mooring winch, and are not certain as to the type of fluid to use, you should ().
Low compressor head pressure in a refrigeration system can be caused by().
A salinity indicator is used to determine the ().