A.Simplex
B.Duplex
C.Canister
D.Bypass
您可能感興趣的試卷
你可能感興趣的試題
A.condition of the expansion valve
B.moisture in the system
C.condition of the compressor suction valves
D.condenser temperature
A.trick wheel
B.accumulator
C.standby pump
D.telemotor
A.Open the bilge pump for inspection
B.Remove each of the manifold valves
C.Remove only the manifold valve to the affected bilge-well
D.Attempt to pump out another bilge well to determine if the entire system is affected
A.too much refrigerant in the system
B.oil entrained in the refrigerant
C.less than a full charge of refrigerant in the system
D.ice crystals forming in the refrigerant
A.with both pumps on line at the same time
B.with one pump on standby
C.with the follow-up gear disconnected
D.only when the rudder is moved amidships
最新試題
The rate of heat transfer from a hot region to a cold region is affected most by the （）.
The rate of heat transfer between the hot and cold fluids passing through a shell-and-tube type heat exchanger will （）.
A pressure drop through the refrigerant liquid line may cause （）.
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will （）.
An internal bypass is provided on some hydraulic system suction strainers to help reduce the possibility of （）.
The general purpose of a heat exchanger is to （）.
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by （）.
The output volume of a positive fixed displacement pump can be changed only by （）.
The control mode in which the final control element is moved from one of two flexed positions to the other is known as （）.
The major source of chemical contaminants in hydraulic fluid is （）.