A.suction side of a bilge pump
B.exhaust manifold of an auxiliary diesel
C.discharge line from an air compressor
D.chemical feed tank of an evaporator
您可能感興趣的試卷
你可能感興趣的試題
A.They should always be started with the discharge valve closed
B.They should always be started with the discharge valve opened
C.A priming pump is always required to flood the impeller suction
D.They should always be started with the sealing line valves closed
A.compressor damage from improper lubrication
B.refrigerant absorption by the lubricant
C.increased viscosity in the lubricant
D.carbon deposit on the compressor suction valves
A.Spring-centered valve
B.Unloading valve
C.Three-position valve
D.Two-position valve
A.Expansion valve
B.Condenser
C.Evaporator
D.Compressor
A.The condenser and the expansion valve
B.The king valve and the solenoid valve
C.The compressor and the expansion valve
D.The condenser and the solenoid valve
最新試題
The temperature differential occurring between the inlet temperature of the fluid to be cooled and the outlet temperature of the cooling medium in a shell-and-tube heat exchanger is greatest in which of the flow designs listed?()
Which of the listed pumps is NOT a positive displacement pump?()
If you are given the job of adding hydraulic fluid to a mooring winch, and are not certain as to the type of fluid to use, you should ().
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by ().
Thermostatic expansion valves can be adjusted for ().
If the head pressure of a reciprocating refrigeration compressor is excessive, ().
One cause of high head pressure occurring in a refrigeration system can be ().
The usual symptoms of cavitation in a centrifugal pump is ().
The amount of fluid friction or internal friction inherent in a mineral lubricating oil is reflected as a measure of its ().
An internal bypass is provided on some hydraulic system suction strainers to help reduce the possibility of ().