A.droop
B.drop
C.dip
D.regulation
您可能感興趣的試卷
你可能感興趣的試題
A.sensor failure
B.failed alarm
C.low level
D.extremely high level
A.half the resistance of the other resistor
B.a resistance equal to the other
C.at least ten times the resistance of the other
D.a partial short circuit
A.To cut out generators when they are no longer required
B.To cut in additional generators automatically as required
C.To divide the KW load equally between generators operating in parallel
D.To divide reactive current between generators operating in parallel
A.capacitor in series with the load
B.inductor in series with the load
C.capacitor and inductor in series with the load
D.resistor in series with the load
A.the resistor next to the negative terminal
B.a short circuit
C.the resistor next to the positive terminal
D.an open circuit
最新試題
Flame failure in an automatically fired auxiliary boiler can from a/an （）
Which of the following items don’t belong to dock repair works?（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
The main purpose of port State control is not to（）
The condensers located in various stages of a flash evaporator are cooled by（）
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）