A.Glass
B.Bakelite
C.Soft iron
D.Aluminum
您可能感興趣的試卷
你可能感興趣的試題
A.current flow in a circuit
B.voltage between two points in a circuit
C.circuit continuity
D.power
A.droop
B.drop
C.dip
D.regulation
A.sensor failure
B.failed alarm
C.low level
D.extremely high level
A.half the resistance of the other resistor
B.a resistance equal to the other
C.at least ten times the resistance of the other
D.a partial short circuit
A.To cut out generators when they are no longer required
B.To cut in additional generators automatically as required
C.To divide the KW load equally between generators operating in parallel
D.To divide reactive current between generators operating in parallel
最新試題
The main purpose of port State control is not to（）
Using a file without a handle may result in （）
The treatment of the fuel oils involves storage, heating, filtering and（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
Flame failure in an automatically fired auxiliary boiler can from a/an （）
The cetane rating of diesel fuel is an indication of the （）
The condensers located in various stages of a flash evaporator are cooled by（）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish