A.Absence, substantial deterioration or failure of proper operation of the cargo deck area fire protection on tanker
B.Absence, non-compliance or serious deterioration of lights, shapes or sound signal
C.Absence or failure of proper operation of the radio equipment for distress and safety communication
D.Absence in a watch of a person qualified to operate equipment essential to safe navigation, safety radio communications or the prevention of marine pollution
您可能感興趣的試卷
你可能感興趣的試題
A.Failure of proper operation of propulsion and other essential machinery, as well as electrical installation
B.Failure of the proper operation of the main and auxiliary steering gear
C.Failure of engineering watch arrangements to confirm to the requirements specified for the ship by Administration
D.Failure of the proper operation of emergency generator, lighting, batteries and switches
A.trim
B.lean
C.draft
D.tonnage
A.back of the vessel
B.the middle portion of a ship
C.a backward movement of a vessel
D.across the ship, at right angles to the fore-and-aft centerline
A.One-hour notice
B.Dead slow ahead
C.Finished with engines
D.Half astern
A.dangerous
B.best
C.bad
D.important
最新試題
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?()
The shipboard oil pollution emergency plan will be invalid after ()
The cetane rating of diesel fuel is an indication of the ()
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
Which of the following items don’t belong to dock repair works?()
Cold weather starting of a diesel engine may be made easier by()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()