A.ship-owner’s
B.master’s
C.chief engineer’s
D.manager’s
您可能感興趣的試卷
你可能感興趣的試題
A.the SOLAS Convention
B.the MARPOL Convention
C.the STCW Convention
D.the LIAD LINE Convention
A.Absence, substantial deterioration or failure of proper operation of the cargo deck area fire protection on tanker
B.Absence, non-compliance or serious deterioration of lights, shapes or sound signal
C.Absence or failure of proper operation of the radio equipment for distress and safety communication
D.Absence in a watch of a person qualified to operate equipment essential to safe navigation, safety radio communications or the prevention of marine pollution
A.Failure of proper operation of propulsion and other essential machinery, as well as electrical installation
B.Failure of the proper operation of the main and auxiliary steering gear
C.Failure of engineering watch arrangements to confirm to the requirements specified for the ship by Administration
D.Failure of the proper operation of emergency generator, lighting, batteries and switches
A.trim
B.lean
C.draft
D.tonnage
A.back of the vessel
B.the middle portion of a ship
C.a backward movement of a vessel
D.across the ship, at right angles to the fore-and-aft centerline
最新試題
To proceed to the assistance of a ship in distress is()
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.
() is not installed on the main switchboar.
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the()
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()
If two A.C.generators are to be operated in parallel, the load is distributed evenly by()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.
The treatment of the fuel oils involves storage, heating, filtering and()