A.Hydraulic stress and distortion will develop
B.Hot spots will develop
C.Fuel oil viscosity will increased
D.An increase in trapped deposits of scale and dirt
您可能感興趣的試卷
你可能感興趣的試題
A.power and intake
B.intake and exhaust
C.exhaust and compression
D.compression and power
A.Hydraulic oil pressure
B.Servomotor action
C.Flyweight centrifugal force
D.Relay motion
A.low coolant temperature
B.insufficient fuel
C.high ambient temperature
D.carbon buildup on the injector tips
A.the splashing of lubrication oil by the crankshaft
B.the dilution of crankcase oil with particles of combustion
C.broken fuel lines spraying oil on the crankcase
D.the ignition of unburned fuel and air in the crankcase
A.Lube oil pressure and temperature
B.jacket water pressure and temperature
C.Engine over-speed
D.Lube oil sump level
最新試題
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）
The main purpose of port State control is not to（）
Which of the following items don’t belong to dock repair works?（）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
（） is not installed on the main switchboar.
Flame failure in an automatically fired auxiliary boiler can from a/an （）
The condensers located in various stages of a flash evaporator are cooled by（）