單項選擇題To minimize the formation of carbon deposits on fuel injection nozzles, you should ()

A.avoid using liquid-cooled nozzles whenever possible
B.avoid low cooling water temperatures
C.avoid prolonged overloading of the engine
D.make certain the gasket seal between the nozzle and cylinder head is tight


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題In a simple mechanical governor, the ()

A.centrifugal force rotates the ball-head
B.flyweight centrifugal force is balanced by spring force
C.flyweight centrifugal force is balanced by hydraulic pressure
D.speeder spring alone actuates the fuel control rod

2.單項選擇題If a diesel engines exhaust temperature is abnormally high, the cause could be()

A.too light of a load
B.injection timing is too early
C.overloading of the engine
D.too low of a compression ratio

3.單項選擇題The knock occurring when a cold diesel engine is started and continues while running at low speed, but stops when the engine reaches normal operating speed and temperature, is().

A.caused by retarded injection timing
B.caused by a mechanical defect in one cylinder
C.caused by high fuel injection pressures
D.normal for these conditions

4.單項選擇題Failure to open the diesel engine test cocks after a long period of shutdown, prior to starting may result in ()

A.an air bound fuel system
B.damage to cylinder heads and pistons
C.excessive fuel injection
D.excessive air valve lift

5.單項選擇題Heat damage to fuel injection nozzles can be prevented by avoiding ()

A.excessive fuel oil temperature
B.long periods of engine overload
C.metallic contact between nozzles and cylinder heads
D.hard carbon deposit and varnish on the nozzles