A.check cylinder lubrication
B.connect the pressure indicator pressure
C.test cylinder heads
D.connect the exhaust gas pyrometers
您可能感興趣的試卷
你可能感興趣的試題
A.At zero load the intake manifold pressure is greater than the exhaust manifold pressure
B.At full load the intake manifold pressure and exhaust manifold pressure are equal
C.At full load the intake manifold pressure is less than the exhaust manifold pressure
D.At full load the intake manifold pressure is greater than the exhaust manifold pressure
A.increasing cooling water flow
B.increasing lube oil flow
C.dilution by fuel oil
D.adding SAE 70 oil
A.engine power losses
B.smoking due to unburned fuel
C.high exhaust temperature readings
D.all of the above
A.incorrect replacement of barrels and plungers of jerk pumps
B.overheating of the nozzle orifices
C.cracked pump housings
D.dirt in the fuel
A.tachometer
B.pyrometer
C.dynamometer
D.calorimeter
最新試題
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
() is not installed on the main switchboar.
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
Flame failure in an automatically fired auxiliary boiler can from a/an ()
Using a file without a handle may result in ()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
Cold weather starting of a diesel engine may be made easier by()