A.Condenser circulating water pump
B.Feed-water heater drain pump
C.Distillate pump
D.Air ejector condenser drain pump
您可能感興趣的試卷
你可能感興趣的試題
A.excessive mist density in the crankcases
B.excessively high crankcase vacuum
C.excessively high bearing temperature
D.excessive carbon buildup in the lube oil
A.overheated injection pumps
B.water condensation in the cylinders
C.fuel dilution of the lube oil
D.air in the fuel system
A.run at an irregular speed
B.create high lube oil temperature
C.cause the engine to over-speed
D.cause blue smoke in the exhaust
A.once every crankshaft revolution
B.once every two crankshaft revolutions
C.once every piston stroke
D.twice every piston stroke
A.China Maritime Administration
B.the company
C.the cargo owner
D.ship owner
最新試題
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
The shipboard oil pollution emergency plan will be invalid after （）
Diesel engine air start system check valves are opened by （）
The ISPS Code consists of a mandatory section-Part A, which shows（）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）