A.insufficient fuel supply
B.faulty governor
C.high exhaust back pressure
D.all of the above may cause this problem
您可能感興趣的試卷
你可能感興趣的試題
A.high lube oil temperature
B.blue smoke
C.the engine to stop
D.piston seizure
A.Take all exhaust temperature reading
B.Check the sump oil level
C.Verify proper lube oil pressure
D.All of the above
A.faulty combustion
B.excessive ring temperature
C.over lubrication
D.all of the above
A.inlet nozzle ring
B.turbine wheel blade
C.diffuser passages
D.inlet vol
A.Excessive fuel
B.Higher than normal temperatures for star up
C.Longer starting periods
D.Higher than normal lube oil pressure
最新試題
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The shipboard oil pollution emergency plan will be invalid after （）
（） is not installed on the main switchboar.
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
The treatment of the fuel oils involves storage, heating, filtering and（）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）