A.check the air filter for dirt
B.check for an exhaust leak
C.check the cooling water temperature
D.notify the bridge that you are going to shut the engine down
您可能感興趣的試卷
你可能感興趣的試題
A.formation of carbon on the intake and exhaust ports
B.high water jacket temperatures
C.overheated pistons and cylinders
D.an increase in lube oil viscosity due to fuel dilution
A.produce a scavenging effect in the combustion space
B.equalize cylinder and exhaust manifold pressures
C.alleviate the difference in valve size between the intake and exhaust
D.flush out condensate that collects after each compression stroke
A.high exhaust temperature and low firing pressure
B.high exhaust temperature and high firing pressure
C.low exhaust temperature and low firing pressure
D.low exhaust temperature and high firing pressure
A.cutting out individual injectors and noting engine performance
B.checking lube oil temperature
C.checking cam position
D.using a timing light
A.increased carbon buildup
B.burning of intake valves
C.excessive firing pressures
D.increased fuel consumption
最新試題
The treatment of the fuel oils involves storage, heating, filtering and()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a()
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
Flame failure in an automatically fired auxiliary boiler can from a/an ()