A.the highest
B.above 3/4
C.1/2 -3/4
D.the lowest
您可能感興趣的試卷
你可能感興趣的試題
A.Ammeter and changeover switch
B.Power factor meter
C.Synchroscope
D.Reverse sequence relay
A.seal water supply be cut off
B.make up water supply be cut off
C.oil outlet valve closed or not open sufficiently
D.the flow rate of oily water is too much
When does auxiliary burner of incinerator put into operation? （）
Ⅰ. start incinerator when it is cold
Ⅱ. the sludge for dealing with is little
Ⅲ. the sludge for dealing with is large
Ⅳ. the water and impurity in sludge are too much
Ⅴ. the temperature in incinerator is low
Ⅵ. dealing with little solid rubbish
A.Ⅰ+Ⅱ+Ⅲ+Ⅴ
B.Ⅰ+Ⅱ+Ⅲ+Ⅳ
C.Ⅰ+Ⅳ+Ⅴ+Ⅵ
D.Ⅰ+Ⅱ+Ⅲ+Ⅵ
A.working at intervals and properly heating
B.warming up to 70℃, increase water supply flow
C.improving impulse of water supply
D.reducing water supply flow
A.MARPOL Annex Ⅲ
B.MARPOL Annex Ⅵ
C.MARPOL Annex Ⅴ
D.MARPOL Annex Ⅳ
最新試題
The cetane rating of diesel fuel is an indication of the （）
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
To proceed to the assistance of a ship in distress is（）
Which of the following items don’t belong to dock repair works?（）
If separating effect is not good, which measure should be taken （）
The main purpose of port State control is not to（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）