A.prevent governor surging at shutdown
B.make sure the fuel nozzles are flushed clean
C.prevent pressure buildup in the fuel lines
D.prevent damage from localized overheating
您可能感興趣的試卷
你可能感興趣的試題
A.stop the combustion air supply
B.engage the jacking gear
C.secure the lube oil pump
D.shut off the fuel at the day tank
A.They conduct heat poorly
B.They are expensive
C.They cannot be replaced
D.They require special tools for removal
A.The diesel oil must never be allowed to mix with the heavy fuel
B.The temperature of the fuel from the pre–heater should be gradually reduced after switching over the three–way valve
C.The heating steam to the pre-heater should be secured as soon as the diesel fuel passes through the three-way valve
D.The heating steam must be secured before the diesel oil passes through the three-way valve
A.To prevent internal damage form local overheating
B.To ensure the fuel nozzles are flushed clean
C.To clear the smoke stack
D.To let the waste heat boiler reduce its rate of steam generation
A.loss of power
B.misfiring
C.low fuel oil pressure
D.All of the above
最新試題
Flame failure in an automatically fired auxiliary boiler can from a/an ()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
Under MARPOL Code the ship to which it applies has to carry ()
The additional mark ()in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?()
Which of the following items don’t belong to dock repair works?()
The cetane rating of diesel fuel is an indication of the ()
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
() is not installed on the main switchboar.
The ISPS Code consists of a mandatory section-Part A, which shows()