A.ignition quality of the fuel
B.calorific value of the fuel
C.flash point of the fuel
D.rate of fuel consumption
您可能感興趣的試卷
你可能感興趣的試題
A.Viscosity
B.acid content
C.heating value
D.ignition quality
A.Viscosity
B.Sulfur content
C.Pour point
D.Cetane number
A.Exhaust energy would draw excess air
B.The inertia of the turbocharger rotor causes a time lag which delays the turbocharger speed increase
C.Exhaust gas pumping losses are increased due to turbine windage
D.Exhaust gas back pressure falls slightly due to increased nozzle action
A.use of low viscosity oil in cold weather
B.increased moisture content of inlet air in cold weather
C.increased drag of pistons and bearings due to increased oil viscosity
D.higher compression pressures reached due to smaller clearances existing in the engine during cold weather
A.octane number
B.cetane number
C.viscosity in Saybolt seconds
D.air fuel ratio
最新試題
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?（）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
The treatment of the fuel oils involves storage, heating, filtering and（）
The condensers located in various stages of a flash evaporator are cooled by（）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.