A.fuel lines
B.lube oil filter
C.crank case pump
D.rocker arm reservoir
您可能感興趣的試卷
你可能感興趣的試題
A.turn engine with jacking gear
B.drain filters and strainers and bleed off water at each injection pump
C.use ether to start the engine with blow-down valves open
D.blow through the cylinders and fuel lines with a drying agent
A.Compression ratio
B.Fuel/Air ratio
C.Compression pressure
D.Lube oil pressure
A.test the starting system
B.remove condensation from the cylinders
C.check the compression
D.check for proper lube oil pressure
A.turn the flywheel
B.reduce friction
C.overcome inertia
D.ignite the fuel
A.lower compression pressures
B.overheating without smoking
C.failure to start
D.a run away without load
最新試題
Flame failure in an automatically fired auxiliary boiler can from a/an （）
The treatment of the fuel oils involves storage, heating, filtering and（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
To proceed to the assistance of a ship in distress is（）
The cetane rating of diesel fuel is an indication of the （）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?（）