A.governor sensitivity
B.exhaust temperature
C.fuel injection pressure
D.speed of the can shaft
您可能感興趣的試卷
你可能感興趣的試題
A.low air charge temperature
B.high cranking speed
C.excessive fuel dilution of lube oil
D.high compression pressure
A.fuel lines
B.lube oil filter
C.crank case pump
D.rocker arm reservoir
A.turn engine with jacking gear
B.drain filters and strainers and bleed off water at each injection pump
C.use ether to start the engine with blow-down valves open
D.blow through the cylinders and fuel lines with a drying agent
A.Compression ratio
B.Fuel/Air ratio
C.Compression pressure
D.Lube oil pressure
A.test the starting system
B.remove condensation from the cylinders
C.check the compression
D.check for proper lube oil pressure
最新試題
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
Under MARPOL Code the ship to which it applies has to carry （）
The condensers located in various stages of a flash evaporator are cooled by（）
（） is not installed on the main switchboar.
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?（）
The cetane rating of diesel fuel is an indication of the （）
The ISPS Code consists of a mandatory section-Part A, which shows（）