A.maintain alignment when the ship’s hull is working in heavy seas
B.ensure engine vibrations correspond to the natural frequency of the hull
C.permit the engine to expand away from the driven equipment as the engine heats up and expands
D.maintain engine thrust bearing clearances
您可能感興趣的試卷
你可能感興趣的試題
A.must churn the oil in the sump
B.is connected to the propeller shaft
C.is driven at the highest RPM
D.compensates for alignment variations between the engine and pinion gear
A.reduce load
B.check your exhaust
C.adjust cooling water temperature
D.increase lube oil flow
A.Lubrication to the defective cylinder should be increased
B.Cooling water temperature to the engine should be increased
C.Only the turbocharger speed should be reduced
D.Engine speed should be reduced
A.incorrect injection timing
B.low exhaust back pressure
C.floating exhaust valves
D.excessive cranking speed
A.electrical overload
B.surging at governed RPM
C.loose engine mounting bolts
D.coolant leaking into the cylinder
最新試題
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?（）
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?（）