A.corrosion on the gears
B.excessive gear speed
C.dirt in the oil
D.misalignment of the gears
您可能感興趣的試卷
你可能感興趣的試題
A.maintain alignment when the ship’s hull is working in heavy seas
B.ensure engine vibrations correspond to the natural frequency of the hull
C.permit the engine to expand away from the driven equipment as the engine heats up and expands
D.maintain engine thrust bearing clearances
A.must churn the oil in the sump
B.is connected to the propeller shaft
C.is driven at the highest RPM
D.compensates for alignment variations between the engine and pinion gear
A.reduce load
B.check your exhaust
C.adjust cooling water temperature
D.increase lube oil flow
A.Lubrication to the defective cylinder should be increased
B.Cooling water temperature to the engine should be increased
C.Only the turbocharger speed should be reduced
D.Engine speed should be reduced
A.incorrect injection timing
B.low exhaust back pressure
C.floating exhaust valves
D.excessive cranking speed
最新試題
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
The shipboard oil pollution emergency plan will be invalid after （）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
The treatment of the fuel oils involves storage, heating, filtering and（）
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
The main purpose of port State control is not to（）